Philipp von Klitzing wrote:
You'll need to provide the CODEC that you are using in X-Lite!
The codec used in Xlite is 711uLaw. I guess it is one of the preferred
ones other than gsm. And it is of small size.
--
David Kwok
FWD#/IAXTEL# : 17001813482 ext 1002
smime.p7s
Description: S/MIME
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address: 00:02:55:30:54:28
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255
inet6
On my Linux box mii-tool yeilds the following which shows 100mbs full
duplex.
[EMAIL PROTECTED] gford]# mii-tool
eth0: negotiated 100baseTx-FD, link ok
/glen
[EMAIL PROTECTED] wrote:
My ADSL speed is Uplink 128kbit and Downstream 512kbit.
The mii-tool does not tell whether eth0 is in
--- [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I have just checked the Openbsd box on the if interface.
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address: 00:02:55:30:54:28
media: Ethernet autoselect (100baseTX full-duplex)
status: active
% comment, the benefit with full duplex comes in to play
with collisions, not so much traffic amounts.
-Original Message-
From: Chris Albertson [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 15, 2004 12:40 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] re hardware requirement
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Chris Albertson
Sent: Thursday, January 15, 2004 12:40 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] re hardware requirement - asterisk
I don't think 10BaseT can run full duplex. I
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address: 00:02:55:30:54:28
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255
inet6
Referring to my previous post about degradation of voice quality when
having more than 2 connection.
The actual route is:
pc xlite - local asterisk box - iaxtel - local asterisk
I have tried out a different situation:
pc xlite - local asterisk box - iaxtel
and the second connection
pc xlite
# ifconfig xl0
xl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address: 00:01:02:78:11:e8
media: Ethernet autoselect (10baseT)
status: active
inet 203.219.167.126 netmask 0xfffc broadcast
On Fri, 16 Jan 2004, [EMAIL PROTECTED] wrote:
This is ifconfig on openbsd box:
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
I think this output shows that the fxp0 interface is on simplex mode.
Yes its in simplex mode, but this parameter is NOT related to half/full
duplex
--- [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Referring to my previous post about degradation of voice quality when
having more than 2 connection.
The actual route is:
pc xlite - local asterisk box - iaxtel - local asterisk
I have tried out a different situation:
pc xlite - local
This is ifconfig on openbsd box:
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
I think this output shows that the fxp0 interface is on simplex mode.
The voice degradation I referred was by using xlite soft phone. I open 2
line similtaneously and dial to FWD and back to
At work, we just put in managed switches... one user had lots of
collisions, which is strange for a switched network... we set the
computer to full/100, and the switch to the same settings, and now it
doesnt have any more collisions...
DH
Rich Adamson wrote:
This is ifconfig on openbsd box:
My ADSL speed is Uplink 128kbit and Downstream 512kbit.
The mii-tool does not tell whether eth0 is in full-duplexed mode. It
just say that it is 100baseTx.
David Kwok
smime.p7s
Description: S/MIME Cryptographic Signature
14 matches
Mail list logo
