Hi list,
I have a TE110P card with asterisk at home 2.5
I can't make to work it with my Telco provider, but i have a router
cisco 2600 series with a E1 interface working correctly with the same
provider.
The configuration of router with the E1 card is:
!
controller E1 1/1
framing NO-CRC4
I don't know the Cicso equipment, but an educated guess from the
configuration info you gave tells me that you need to use MFC R2
signalling.
Read about it here:
http://www.voip-info.org/tiki-index.php?page=Asterisk+MFC+R2
And pay heed to the big disclaimer at the front of it.
-Bill
On
Bill
I was already reading about MFC/R2, but I think that I have problems
with the MFC/R2 signaling
I tried with the following configuration
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
loadzone=us
defaultzone=us
And I have the following error
Jul 5 09:11:17 WARNING[5454]
Do you know what signalling your telco is giving to you? I only
have hints from your Cisco excerpt, namely CAS and R2.
What is in your zapata.conf for this link? Particularly the
switchtype and signalling entries. Maybe these are incorrect?
Possibly asterisk is expecting some common channel
Bill Schaffer wrote:
I don't know the Cicso equipment, but an educated guess from the
configuration info you gave tells me that you need to use MFC R2
signalling.
Read about it here:
http://www.voip-info.org/tiki-index.php?page=Asterisk+MFC+R2
And pay heed to the big disclaimer at the front
Here is my E1 setting in zaptel.conf: -
span=1,1,0,ccs,hdb3
bchan=1-15 # set this to 1-15,17-31 for E1
bchan=17-31 # set this to 1-15,17-31 for E1
dchan=16 # set this to 16 for E1
loadzone = us
defaultzone=us
Here is my E1 setting in zapata.conf: -
switchtype=euroisdn
signalling=pri_net
group=1
] On Behalf Of root linux
Sent: Thursday, 6 July 2006 3:29 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] [Asteirsk-Users]TE110P configuration problem
Here is my E1 setting in zaptel.conf: -
span=1,1,0,ccs,hdb3
bchan=1-15 # set this to 1-15,17-31 for E1
bchan
