-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I finally found the option in the Call Router - Route Config menu:
when choosing Early disconnect, SIP BYE is sent as soon as ISDN
Disconnect is received. That solved my problem.
Thanks,
- --
Jean-Denis Girard
SysNux Systèmes
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 11/02/2013 12:40, giovanni.v a ←crit :
On 11/02/2013 17.01, Jean-Denis Girard wrote:
I believe the first one will be not a viable option at all, no telco
will change any important protocol compliance rule on a per subscriber
basis.
Well, in
On 12/02/2013 17.43, Jean-Denis Girard wrote:
You're right, when someone answers it's not a problem. But if the caller
is sent to voicemail and he hangups, we get 30 seconds disconnect tone.
Yes, I imagined Your problem was born on such scenario.
Yes, I already looked for such a
On 11/02/2013 5.18, Jean-Denis Girard wrote:
The
Mediatrix sends incoming calls from the PSTN to an Asterisk server via
SIP: this works fine. But when the caller hangs up, the Mediatrix
doesn't send Bye to Asterisk, so the call is not finished immediately
from the Asterisk point of view: the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 11/02/2013 03:44, giovanni.v a ←crit :
I think the gateway is working in compliance to ETS 300 102-1 (5.3.4.1
Clearing when tones/announcements provided). 30 Sec. is the time
assigned to T306 on the network side.
Ok, thanks for your analysis.
On 11/02/2013 17.01, Jean-Denis Girard wrote:
So the solution would be that the network does not send the progress
indicator in the Disconnect message, or find a configuration parameter
on the gateway so that it ignores the progress indicator, right?
I believe the first one will be not a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi list,
I'm getting a strange problem with a Mediatrix 3631 Gateway connected to
the PSTN via an E1 PRI link configured for Euro ISDN signaling. The
Mediatrix sends incoming calls from the PSTN to an Asterisk server via
SIP: this works fine. But