As it turns out the telco was not routing the calls to us, a little
misktake they said after 3 days of being with no service.
The line was not CAS, it was CCS, no need to compile unicall.
Whatever they meant with your card has to be configured with DSS1
will remain in mystery. Maybe someone here
Erick Perez wrote:
Yes I do. I even did a pri debug span 1 and when I call the asterisk
box, it sees nothing.
Hmn, well, that's telling.
Are you using the correct cable? Is the cable plugged into the correct
port on the card? The 102 is a two-port.
-Stephen-
If you do not have any alarms and PRI debug span 1 still gives you
nothing then you need to call your telco and say I'm not getting any
Q.931 messages on the D-Channel.
Stephen Bosch wrote:
Erick Perez wrote:
Yes I do. I even did a pri debug span 1 and when I call the asterisk
box, it sees
1.2.23 and Sangoma a102 no incoming
calldetected
Hi,
after many issues we finally managed to make our system do outgoing
calls with perfect quality.
However I cannot detect *any* form of incoming call. when I use an
outside phone to call the E1 connected to the sangoma a102, I
instantly get
: Erick Perez [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 26, 2007 7:03 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Asterisk 1.2.23 and Sangoma a102 no incoming
calldetected
Hi,
after many issues we finally managed to make our system do outgoing
calls with perfect quality