James Arscott <[EMAIL PROTECTED]> writes:
> Hi
>
> Small progress, though combining the suggest below, enabling overlapdial and
> a few other things I have got the following :
>
> When you hit 9 on the simenes, you hear a dial tone. As soon as you hit
> another number to start dialling it complain
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi
Small progress, though combining the suggest below, enabling overlapdial and a few other things I have got the following :
When you hit 9 on the simenes, you hear a dial tone. As soon as you hit another number to start dialling it
James Arscott <[EMAIL PROTECTED]> writes:
> My concern is still over if L2 and L3 are Œup¹ on my ISDN between the
> asterisk and siemens, I do my settings look right ? I thought my timing on
> span 2 maybe incorrect ?
If you do a "pri show span 2" you get a short info about the state of
the span.
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi, thanks I will try both of those, I had tried overlapdial before with no luck, but maybe its a combination of things I need.
My concern is still over if L2 and L3 are ‘up’ on my ISDN between the asterisk and siemens, I do my
James Arscott <[EMAIL PROTECTED]> writes:
> Asterisk is not matching the extension from the siemens because the siemens
> has not even sent one yet, it is still waiting for a dial tone. When I hit 9
> on the siemens it does not get a dial tone from asterisk, I assume this is
> because I have not t
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi, thanks for this, something I had totally looked over because I saw the span 2 had gone from RED to OK.
Zapata.conf
-
[channels]
language=en
; Default context
context=inbound-from-pstn
switchtype=euroisdn
signalling
Hi James,
>James wrote;
>When I hit 9 on the
siemens it does not get a dial tone from asterisk, I assume this is
>because I have not told
asterisk to give it one.
I might be wrong;
My question is, are you sure
your ISDN ( Asterisk span to Siemens ) is up logically?
ISDN is no tone gi
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi, I just realised I think I have missed a step
Asterisk is not matching the extension from the siemens because the siemens has not even sent one yet, it is still waiting for a dial tone. When I hit 9 on the siemens it does not
James Arscott wrote:
> I also tried just using s , this again did not work. I assumed the
> ‘Extension ‘’ in context’ part of my debug meant that the siemens is not
> sending, or asterisk can’t work out, what extension is being sent If
> that makes sense
It means that whatever context y
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi Jon, thanks for the reply, good to know I am on the right track!
I have actually already tried your suggestion, but using :
_. To try and match what the siemens was sending, but this did not work, I know this is not advisable in
James Arscott wrote:
> Hi, thanks to the original poster, I redid all the cabling and immediately
> got the span to go OK between asterisk and the siemens legacy PBX. Only
> problem now is working out how to handle the calls from the siemens
> Worth pointing out at this stage I have no access
Hi, thanks to the original poster, I redid all the cabling and immediately
got the span to go OK between asterisk and the siemens legacy PBX. Only
problem now is working out how to handle the calls from the siemens
Worth pointing out at this stage I have no access to the siemens
configuration,
Title: Re: [asterisk-users] Asterisk and Siemens Legacy PBX
Hi, thanks I will try this tomorrow morning when the legacy PBX can be taken ‘offline’ for a few hours, any suggestions on specific asterisk configuration options that I may have missed to achieve this ? I am hoping its just the cable
probably need a crossed t1 cable
1-4
2-5
On Aug 4, 2006, at 4:20 PM, James Arscott wrote:
Hi, this is my first post, so go easy on me !
Sorry if this has been covered before, I could not find an answer that
helped me.
I am trying to achieve the following :
Telco ISDN30e PRI <-> Asterisk wi
Hi, this is my first post, so go easy on me !
Sorry if this has been covered before, I could not find an answer that
helped me.
I am trying to achieve the following :
Telco ISDN30e PRI <-> Asterisk with TE210P <-> Siemens HiPath PBX
The siemens is a legacy PBX and I am not 100% of the modules e
15 matches
Mail list logo