Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-10 Thread dave cantera
vijay, I had a similar problem with a pots line and 1.4.1... zap wasn't loading. from the CLI check that zap is loaded with 'zap show channels' pbx15*CLI zap show channels Chan Extension Context Language MOH Interpret pseudodefaultdefault 25

[asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Vijay Gaur
Hi All, I would appreciate a lot if you could help me. I have installed Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have also installed 1 FXO port card: Digium TDM400P. After loading zaptel driver I could see my digium card's led glow green. Tested with zttool that its in

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Stephen Bosch
Vijay Gaur wrote: Hi All, I would appreciate a lot if you could help me. I have installed Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have also installed 1 FXO port card: Digium TDM400P. After loading zaptel driver I could see my digium card's led glow green.

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Vijay Gaur
Hi Stephen, I made the call from outside phone(cellphone) to my vonage number. Call went to the voicemail. My extension.conf has [incoming] exten=s,1,Answer() and more lines. I assume core show channels should show 1 active channel. Its showing 0. Thanks a lot again Stephen. Regards, Vijay

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Stephen Bosch
Vijay Gaur wrote: Hi Stephen, I made the call from outside phone(cellphone) to my vonage number. Call went to the voicemail. My extension.conf has [incoming] exten=s,1,Answer() and more lines. I assume core show channels should show 1 active channel. Its showing 0. Your calls are not

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Vijay Gaur
I hear ring few times and then it goes to voice mail. Looks like call is not going to asterisk. My regular phone attached to that line works fine. Regards, Vijay On 4/9/07, Stephen Bosch [EMAIL PROTECTED] wrote: Vijay Gaur wrote: Hi Stephen, I made the call from outside phone(cellphone)

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Stephen Bosch
Vijay Gaur wrote: I hear ring few times and then it goes to voice mail. Looks like call is not going to asterisk. My regular phone attached to that line works fine. When you plug the phone into the port on the Vonage ATA that you're using to connect to Asterisk, the phone rings when you call

Re: [asterisk-users] Asterisk installation issue - CLI showing 0 active channels

2007-04-09 Thread Vijay Gaur
Yes when I plug my phone to vonage adapter it rings fine. I will run and send you the output soon. Thanks Vijay On 4/9/07, Stephen Bosch [EMAIL PROTECTED] wrote: Vijay Gaur wrote: I hear ring few times and then it goes to voice mail. Looks like call is not going to asterisk. My regular phone