Sent from my iPhone
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users
First of all, I want apologize for the first two blank emails that I sent out
by mistake.
I have Xorcom USB fxo channel bank, asterisk 1.6, freepbx 2.8. Up to now, the
lines connected from Telekom did not have caller id feature enabled, now that
we enabled we cannot see incoming caller id
I am going to be on site at one of my recent installs tomorrow and I am
hoping to fix an issue with the caller id. I would like suggestions for
possible problem areas and so I thought I would give as much details as I
can. The system has a Sangoma A200D card in it with 4 FXO ports and 2 FXS,
The
Bruce Reeves wrote:
Nov 21 16:54:09 ERROR[6039] caller id.c: fsk_serie made mylen 0 (-9)
Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID feed failed: Success
Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID returned with error
on channel 'Zap/1-1'
I have exactly the same problem with
adjust your rxgain up or down
Anton Frolov wrote:
Bruce Reeves wrote:
Nov 21 16:54:09 ERROR[6039] caller id.c: fsk_serie made mylen 0 (-9)
Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID feed failed: Success
Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID returned with error
on
How does the gain play into the callerid? And would the gain being to low
actually effect all 3 lines not just the first 2?
On 11/27/06, Eric ManxPower Wieling [EMAIL PROTECTED] wrote:
adjust your rxgain up or down
Anton Frolov wrote:
Bruce Reeves wrote:
Nov 21 16:54:09 ERROR[6039] caller
CallerID (in the USA and Canada) comes in as a 1200 or 2400 baud FSK
burst, just like a modem. If the volume is too high the audio gets
distorted, if it is too low it is distorted.
Bruce Reeves wrote:
How does the gain play into the callerid? And would the gain being to low
actually effect
Are there different error messages for too high or too low. The reason I ask
is I tried making some adjustments and running ztmonitor while calling a
line and what I saw was that when the rxgain was pretty high
Nov 27 16:24:07 ERROR[7877]: callerid.c:276 callerid_feed: fsk_serie made
mylen 0
The NOTICEs indicate that Caller*ID should be getting into the system.
I don't know what else to suggest.
Bruce Reeves wrote:
Are there different error messages for too high or too low. The reason I
ask
is I tried making some adjustments and running ztmonitor while calling a
line and what I
Can someone please assist me in getting caller id working with the dev
kit.
Is there a howto anywhere?
I think I have it setup right, it just does not work.
Michael
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
10 matches
Mail list logo