Hi list!
ConfBridge dtmf_passthrough=no doesn't seem to have any effect. DTMF
gets transmitted throughout the conference. I've tried Asterisk 10.7.1
from the official RPMs and 10.8.0 compiled from source.
I've confirmed that it's disabled via the CLI confbridge show profile
user
On 28/09/12 06:50 AM, Markus wrote:
Hi list!
ConfBridge dtmf_passthrough=no doesn't seem to have any effect. DTMF
gets transmitted throughout the conference. I've tried Asterisk 10.7.1
from the official RPMs and 10.8.0 compiled from source.
I've confirmed that it's disabled via the CLI
Hi Leif,
Am 28.09.2012 13:24, schrieb Leif Madsen:
Searching the issue tracker (hint, hint) does not return any
dtmf_passthrough issues other than this one[0], which doesn't look to be
related.
thanks for your reply.
Right, doesn't look related.
Is another channel connected to the
On 28/09/12 07:36 AM, Markus wrote:
Am 28.09.2012 13:24, schrieb Leif Madsen:
Is another channel connected to the conference receiving the DTMF? Is
that what you're intending? Because from my understand that is the
intention, and not simply to limit the DTMF from being in the conference
in the
Hi again Leif,
Am 28.09.2012 13:42, schrieb Leif Madsen:
OH! I just tested with a SIP softphone (X-Lite), and DTMF does not get
passed to the other users! In X-Lite I can hear the DTMF keypresses of
the users connected via PSTN (incoming via SIP), but when I hit a key in
X-Lite I can't hear
Markus wrote:
Snipped long results list
PSTN means that I've tested two times, from a regular landline and from
a mobile. Always calling to the providers DID which ends up in Asterisk
via SIP. In the case of ConfBridge there were always 2 participants in
the conference so that I could check if
Hi Joshua,
Am 28.09.2012 15:56, schrieb Joshua Colp:
I think your results are sort of skewed. In the case of SIP - SIP if a
local bridge occurs things will optimize and you most likely won't see
DTMF related messages. They get passed through as packets and not fully
interpreted.
ah, ok! That
Markus wrote:
Hi Joshua,
Hola,
My suggestion is to take a step back further.
Just send incoming calls to the Read application and have it store the
received DTMF in a variable. Next step have it output what was received.
Ok, good idea, here are the results of Read() and SayDigits():
Am 28.09.2012 17:33, schrieb Joshua Colp:
Ok, good idea, here are the results of Read() and SayDigits():
snipped results to make this email manageable
How are you changing the DTMF for each provider? If you are merely
changing it using dtmfmode in sip.conf this may or may not change how
the
Markus wrote:
Am 28.09.2012 17:33, schrieb Joshua Colp:
Ok, good idea, here are the results of Read() and SayDigits():
snipped results to make this email manageable
How are you changing the DTMF for each provider? If you are merely
changing it using dtmfmode in sip.conf this may or may not
10 matches
Mail list logo
