Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Detect if a Number is up or not
>
> another idea you could test is to use a very short Timeout in your Dial
> command.
>
> like Dial(ZAP/012345678,1) - will dial and exit after 1 sec w
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ioan Indreias
Sent: Tuesday, April 27, 2010 2:36 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Detect if a Number is up or not
another idea you could test is to use a very short Timeout in your Dial
another idea you could test is to use a very short Timeout in your Dial command.
like Dial(ZAP/012345678,1) - will dial and exit after 1 sec with
DIALSTATUS set accordingly
HTH,
Ioan
--
_
-- Bandwidth and Colocation Provided by
Thanks Motiejus Jakstsys
Thank you for the value able info i will give it a try.
2010/4/26 Motiejus Jakštys
> AMI writes event "Ringing...", you can catch it and (via the same AMI)
> send a soft hangup request.
>
> On Mon, Apr 26, 2010 at 12:54 PM, ABBAS SHAKEEL
> wrote:
> > Thank you Zhang Sh
AMI writes event "Ringing...", you can catch it and (via the same AMI)
send a soft hangup request.
On Mon, Apr 26, 2010 at 12:54 PM, ABBAS SHAKEEL
wrote:
> Thank you Zhang Shukun,
>
> I was wondering if it is possible to make one or ring and then stop the
> call. But i don't find a way for that.
Thank you Zhang Shukun,
I was wondering if it is possible to make one or ring and then stop the
call. But i don't find a way for that.
So i am doing it like .. make a call on accept wait and then hangup.
On Tue, Apr 20, 2010 at 12:34 PM, Zhang Shukun wrote:
> Dial() will return Dialstatus
Dial() will return Dialstatus , if the number dialed is busy or off
now. use this application you can detect a number is busy or not
in several seconds. i use this method in my dialplan.
2010/4/19 ABBAS SHAKEEL :
> Hello Community,
>
> I Want to detect if a cell number is ON or OFF... for that ma
Hello Community,
I Want to detect if a cell number is ON or OFF... for that matter i can
generate call to it using PSTN lines (configured with asterisk).
The problem is that i only want to see if the cell number can receive a
ring or not. If ring is recieved at called number end then mark it as