Hi List!

We have two Asterisk servers connected to a PRI, an old one and a new one.

The old server (voip1 let's call it) is running Asterisk 1.4.23, libpri
1.4.9, and DAHDI 2.1.0.4.

The new server (voip2) is running Asterisk 1.8.6, libpri 1.4.2 and DAHDI
2.4.0. We've had serious, show-stopping stability issues with any previous
version of Asterisk 1.8, and we're very leery about changing to any other
version now that we've found one that works.

Voip1 used to be our live SIP hosting server, and while we were migrating
to the new Asterisk server, the old server continued to accept calls on
the PRI and forwarded those calls to the new server to minimize disruption
to service. Since our intention was to move the new server to the PRI when
the migration was fully completed, we set up Voip1 as a PRI bridge - one
port on the PRI card was used for connecting directly to the PRI, and
another port was set up as an exact copy of our PSTN provider's PRI (our
configuration below will show this), and we connected this from Voip1 to
Voip2. Incoming DIDs would have a dialplan on Voip1 that accepted the call
and then immediately called the same DID on Voip2, like this:

exten => 6041234567,1,Dial(DAHDI/g4/6041234567)
exten => 6041234567,n,Macro(handle-hangup,hc-16)

This worked flawlessly. All of our DIDs were migrated to Voip2 and
everything was ironed out over time. The problem is, that apparently the
PRI between Voip1 and Voip2 is not exactly the same as the PRI from our
PSTN provider. I should have been able to simply unplug Voip1 and plug the
PRI directly into Voip2 without any issues whatsoever, but instead we
found the following:

1. Incoming calls worked fine for two-way voice, but any call coming
through the PRI would show "Anonymous" for the caller ID name and number.
This was in spite of the fact that first, this did not happen when the PRI
went through Voip1, and second, after setting up the dialplan on our
inbound context to display the Caller ID name and number on the Asterisk
console, I could see the name and number as it was supposed to be
displayed.

2. After googling for this issue, I found this page:
http://forums.asterisk.org/viewtopic.php?p=166952 which described a
solution to change sip.conf to enable trustrpid and sendrpid globally.
This fixed the problem somewhat, but many of our customers ceased to be
able to make outbound calls because their ATAs were now sending either a
MAC address as their caller ID name and number, or their SIP usernames as
the caller ID name and number. Something somewhere wouldn't allow outbound
calling as a result, but I think the main problem is that we would trust
and/or send the RPID not just to the SIP phones, but also *from* the SIP
phones. We should be able to set the caller ID name and number on the
server, rather than trust the client. Either way, these settings weren't
interfering when the equipment on the other side of the PRI was an
Asterisk box, so I don't understand why Asterisk's behaviour had changed
at all.

Okay, finally, I have the DAHDI configuration for both servers, to show
how the PRI was set up:


Voip1:

[channels]
usecallerid=yes
cidsignalling=bell
; This one causes problems with Bell telephone numbers, or something.
cidstart=polarity
; The default is "ring"
; cidstart=ring

facilityenable=yes
hidecallerid=no
callwaitingcallerid=yes
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
;echotraining=yes
echocancelwhenbridged=no
immediate=no

; PRI group 1:
group=1
signalling=pri_cpe
switchtype=national
pridialplan=unknown
relaxdtmf=yes
context=local
channel=>1-23
rxgain=0
txgain=0
busydetect=yes
busycount=5

resetinterval=3600

#include dahdi-channels.conf

FILE dahdi-channels.conf:

; Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 26 22:53:04 2010 --
do not hand edit
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is
intended
; to be #include-d by /etc/asterisk/chan_dahdi.conf that will include the
global settings
;

; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
;group=0,11
;context=from-pstn
;switchtype = national
;signalling = pri_cpe
;channel => 1-23
;context = default
;group = 63

; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
;group=0,12
;context=from-pstn
;switchtype = national
;signalling = pri_cpe
;channel => 25-47
;context = default
;group = 63

;; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
;group=0,13
;context=from-pstn
;switchtype = national
;signalling = pri_cpe
;channel => 49-71
;context = default
;group = 63

; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
group=4
context=default
switchtype = national
signalling = pri_net
channel => 73-95
context = default
group = 63

FILE /etc/dahdi/system.conf

# Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 26 22:53:04 2010 --
do not hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24
echocanceller=mg2,1-23

# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
span=2,2,0,esf,b8zs
# termtype: te
bchan=25-47
dchan=48
echocanceller=mg2,25-47

# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
span=3,3,0,esf,b8zs
# termtype: te
bchan=49-71
dchan=72
echocanceller=mg2,49-71

# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
span=4,0,0,esf,b8zs
# termtype: te
bchan=73-95
dchan=96
echocanceller=mg2,73-95

# Global data

loadzone        = us
defaultzone     = us


Voip2:
FILE /etc/asterisk/chan_dahdi.conf:

[channels]
usecallerid=yes
cidsignalling=bell
; This one causes problems with Bell telephone numbers, or something.
cidstart=polarity
; The default is "ring"
; cidstart=ring

facilityenable=yes
hidecallerid=no
callwaitingcallerid=yes
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
;echotraining=yes
echocancelwhenbridged=no
immediate=no
group=1
signalling=pri_cpe
; Switching to National at the end of May 2010
switchtype=national
; switchtype=5ess
;context=incoming
; Added Mar 13, 2012
; Don't use this. It breaks incoming faxes.
; relaxdtmf=yes
context=local
channel=>1-23
dchannel=>24
;channel=25-47,49-71,73-95
rxgain=0
txgain=0
busydetect=yes
busycount=5

resetinterval=1800

FILE /etc/dahdi/system.conf:

# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 10 12:58:48 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF
span=1,1,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24
echocanceller=mg2,1-23

# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
span=2,2,0,esf,b8zs
# termtype: te
bchan=25-47
dchan=48
echocanceller=mg2,25-47

# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
span=3,3,0,esf,b8zs
# termtype: te
bchan=49-71
dchan=72
echocanceller=mg2,49-71

# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
span=4,4,0,esf,b8zs
# termtype: te
bchan=73-95
dchan=96
echocanceller=mg2,73-95

# Global data

loadzone        = us
defaultzone     = us



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to