2008/8/7 Mr Shunz [EMAIL PROTECTED]
have you tried to configure the ports in PTMP mode instead of PTP?
I found that for some PBX works better...
Yes, I tried but it didn't work. Anyway Philips pbx needs to work in PTP
mode.
can you post your misdn-init.conf and misdn.conf?
Of course :)
P.s. I tried to use an Openvox B800P instead of the Digium B410P and it
worked immediately, without any problem or modification to the default
configuration files. Maybe Digium card is fisically damaged?
mmm... i have an installation with two OpenVOX B400P and misdn-1.1.7 connected
to a
Hi all,
[snip]
For this reason I set all the 4 ports of Digium's card in NT mode
(Philips can not do this). Then i opportunely
edited /etc/misdn-init.conf and /etc/asterisk/misdn.conf. In fact, when
I run the command misdn shows stacks in * CLI, I can see all ports in
NT (PTP) mode.
have
Hi all,
my goal is to connect my trixbox server (CentOS 5.2 - kernel
2.6.18-53.1.4.el5 - * 1.4.20-1) with a legacy Philips PBX with 4 bri
links provided from Digium B410P.
For this reason I set all the 4 ports of Digium's card in NT mode
(Philips can not do this). Then i opportunely
edited