On 06/05/2015 08:15 PM, sean darcy wrote:
I've been having problems segfaulting when receiving faxes. So I tried
FFA. I used the register utility and my license is in /var/lib/asterisk :
ls /var/lib/asterisk/licenses/ -l
total 4
-rw-r--r--. 1 root root 325 Jun 5 22:41 FFA-DNCXXX.lic
but:
E
I've been having problems segfaulting when receiving faxes. So I tried
FFA. I used the register utility and my license is in /var/lib/asterisk :
ls /var/lib/asterisk/licenses/ -l
total 4
-rw-r--r--. 1 root root 325 Jun 5 22:41 FFA-DNCXXX.lic
but:
Executing [17772822954@FaxIncoming:4]
Rece
On Fri, Dec 11, 2009 at 10:30 AM, Leif Madsen
wrote:
> Warren Selby wrote:
> > Can I install my free fax for asterisk license on more than one
> > machine? I.e using my digiun account to download the free FFA module,
> > am I restricted to just the first machine I put it on, or can I put
> > the
Warren Selby wrote:
> Can I install my free fax for asterisk license on more than one
> machine? I.e using my digiun account to download the free FFA module,
> am I restricted to just the first machine I put it on, or can I put
> the free FFA on multiple servers?
I would believe you get a s
Can I install my free fax for asterisk license on more than one
machine? I.e using my digiun account to download the free FFA module,
am I restricted to just the first machine I put it on, or can I put
the free FFA on multiple servers?
Thanks,
--Warren Selby
_
Kevin P. Fleming wrote:
> If you can, run it again under 'strace', capture the output, compress it
> with gzip or bzip2 and email it to me directly; that may give us a clue
> what it was doing.
Requested strace output sent.
Barry
___
-- Bandwidth a
Barry L. Kline wrote:
> What is a reasonable time for this entire test suite to finish, if it
> completed normally?
There are 15 CPU flavors being tested, and each one will take 3-5
seconds to complete; certainly no more than one minute, on an otherwise
idle system. As you can see from your 'time
Kevin P. Fleming wrote:
> You say it has stopped at different points as you've run different
> tests; can you verify that? If it always stops at 'nocona', that would
> mean one particular type of problem, but if it stops at various
> different places, then that would point to something very differ
Barry L. Kline wrote:
> Is there a newer version of this software and can anyone give me an
> indication if they, too, have had this problem and what they did to get
> past it.
No, version 1.0.7 is the latest version of benchfax. The program takes
steps to handle the problems that occur when the
I'm trying to install my first channel of FAX. When I run the benchfax
utility, I get to various stages and then the program simply hangs.
There is no excessive CPU utilization and the benchfax program readily
responds to ^C. Sometimes I get fairly far into the test, other times
it hangs almost im
Hi Gang,
I've got 1.4.25-rc1 up and running pretty good now. The only
difficulties I have left to conquer are:
1. FFA won't receive a fax from a DELL A990 (failed on 6 out of 7
attempts with wrong protocol or timeout).
2. DAHDI dial makes a clicking/static sound on line du
On Wed, May 13, 2009 at 7:39 AM, Markus Weiler
wrote:
> I wasn`t very conviced about Spandsp, after trying several versions it
> worked, but not well.
spandsp has been revised to the point that it's now at 0.0.6pre11,
released this month. I've had quite the opposite experience, that
newer version
On Wed, May 13, 2009 at 3:43 AM, Markus Weiler
wrote:
> I installed Digiums Free Fax for Asterisk and found out, that it
> automatically retries failed faxes, is there a way to stop that?
You already claimed that this isn't actually the case. I will tell you
that the hardware fax appliances I hav
app_rxfax modules?
>
> Regards
> David.
>
> -Original Message-
> From: asterisk-users-boun...@lists.digium.com
> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Markus Weiler
> Sent: Wednesday, 13 May 2009 5:44 PM
> To: asterisk-users@lists.digium.co
Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Markus Weiler
Sent: Wednesday, 13 May 2009 5:44 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Free Fax for asterisk
Hi,
I installed Digiums Free
Hi,
I installed Digiums Free Fax for Asterisk and found out, that it
automatically retries failed faxes, is there a way to stop that?
Thanks
Markus
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing lis
16 matches
Mail list logo