Dears;
First, I would like to declare that I used sip_custom.conf and
extensions_custom.conf and I discovered that the calls are not shown in the
CDR.
Until now I did not check if I can browse the voicemails using the FreePBX if I
used the extensions_custom.com file.
Now, if we are talking
Great tip Duncan :)
On Thu, Jul 12, 2012 at 10:29 AM, Duncan Turnbull dun...@e-simple.co.nzwrote:
You can also specify routes with an callerid qualifier as 09XX/20X
This would only have it apply to extensions in the 200-209 range
That route can then point to a trunk going nowhere if
Thanks Samy
I am figuring you may know but with freepbx if you want to make it a bit more
tailored then send it to a custom trunk
In freepbx add a custom trunk with the custom dial string
Local/$OUTNUM$@blocked-number-custom
/etc/asterisk/extensions_custom.conf
[blocked-number-custom]
exten =
Fine, did you read the question well and understand about what I am asking?
I know well what Verbose do and what Goto do, and my question is not related to
what they are doing because I used Goto 100 times or more. I have been working
on Asterisk more than 5 years and installed alot of sites.
On Wed, Jul 11, 2012 at 4:56 PM, bilal ghayyad bilmar...@yahoo.com wrote:
Fine, did you read the question well and understand about what I am asking?
Perhaps I did not understand what you were asking. I thought you were
wanting to do something custom per extension (in the case of my example,
See
Route-Permissions module,
It lets you restrict certain phones/extensions to follow a dial-plan
pattern and dial out to the defined trunk etc meanwhile not breaking any
other functionality or features of FPBX- though you can restrict the
features from this too.
You can also specify routes with an callerid qualifier as 09XX/20X
This would only have it apply to extensions in the 200-209 range
That route can then point to a trunk going nowhere if you want to block them
In freepbx there is a field in outbound route page to select callerid that the
I went for admin/module admin and I search for custom contexts but did not find
it. How I can get it?
Regards
Bilal
---
The module is custom contexts - its a third party option in
the module admin
But you can write contexts in the extensions_custom.conf if
you want to
I
Please don't top-post.
On Tue, 10 Jul 2012, bilal ghayyad wrote:
--
Thanks in advance,
-
Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST
Newline Fax:
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Steve Edwards
Sent: Tuesday, July 10, 2012 5:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] FreePBX: using
Dear Warren;
I did not understand the example below well.
What the Verbose will do? It will write in the CDR or the database? Really this
did not understand.
Also did not understand this lineL same = n,Goto(${EXTEN},from-internal,1) How
it will work? Can u plz explain?
Regards
Bilal
- Original Message -
From: bilal ghayyad bilmar...@yahoo.com
To: asterisk-users@lists.digium.com
Sent: Tuesday, July 10, 2012 4:25:40 PM
Subject: Re: [asterisk-users] FreePBX: using context other than the default
context and the generation for the
configuration
Dear Warren;
Dears;
Thanks for all the replies and help.
First of all, I am not looking to have the custom context only for outbound, I
need this also to separate the extensions into partitions, so I can have same
extensions in different contexts, also extensions in context A can not call
extensions in
Hi All;
If I set a context other than the default context, then I do not see a
generation for a configuration in the extensions_additional.conf for this
context, but always the generation for the configuration is for the default
context (from-internal).
Normally, I have to put some Phones in
Hey,
If you want to have all the dialplan features for your extensions and still
need to implement some outbound calling restrictions then you need to look
for some modules in freePBX. i've used that module exactly for this purpose
and it works..can't remember its name.
Just google it or lookup
The module is custom contexts - its a third party option in the module admin
But you can write contexts in the extensions_custom.conf if you want to
I wouldn't use freepbx to generate your code - its quite complex code for a
roll your own system, but very useful if you learn its gui and options
On Thu, Jul 5, 2012 at 5:20 PM, bilal ghayyad bilmar...@yahoo.com wrote:
Hi All;
You can get modules to do what you're looking for, but if you really want
to make a custom context but still have all the available features of the
default context, you can add the following at the end of your
umm Warren, yes including from-internal is the way of getting all the
features,,,but in my experience the calls going out using the dialplan
script we manually enter in our custome context don't get inserted into the
FreePBX CDR and recording stuff !!
On Fri, Jul 6, 2012 at 10:01 AM, Warren
On Fri, Jul 6, 2012 at 12:11 AM, SamyGo govoi...@gmail.com wrote:
umm Warren, yes including from-internal is the way of getting all the
features,,,but in my experience the calls going out using the dialplan
script we manually enter in our custome context don't get inserted into the
FreePBX
19 matches
Mail list logo
