On 4/10/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
chan_sccp with the patches for 1.4
Everything should be fine, then, unless maybe you have really old
firmware on the phones. That's the only thing I can think of. I've
been running 1.4.2 with chan_sccp for a while in a test environmen
On Tue, Apr 10, 2007 at 03:35:23PM -0500, Lacy Moore - Aspendora wrote:
> On 4/10/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> >exten => 104,Dial(SCCP/SEP00036BC3852B,20)
> >exten => 104,2,Voicemail(u104)
> >exten => 104,102,Voicemail(b104)
> >exten => 104,103,Hangup()
> >
> Actually, if this
On 4/10/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
exten => 104,Dial(SCCP/SEP00036BC3852B,20)
exten => 104,2,Voicemail(u104)
exten => 104,102,Voicemail(b104)
exten => 104,103,Hangup()
Actually, if this is a cut and paste, you are missing the 1. It should be:
exten => 104,1,Dial...
you
> > can't seem to see what it is. Anyone have any suggestions?
> >
>
> Dial(SCCP/[EMAIL PROTECTED])
>
> --
That seems better, but it's almost as if asterisk doesn't realize that the
phone has been hung up.
[Apr 10 16:27:02] ERROR[31001]: sccp_channel.c:531 sccp_channel_hold:
SEP00036BC385
Do you have any console messages?
SCCP uses a "station start tone" message with a value of "Inside Dial Tone" and
a direction of "Tone Output User". and the "line instance" and "Station Tone
Output Direction" should be set to something other than 0.
SCCP runs over TCP so you should get this
- [EMAIL PROTECTED] wrote:
> [snip]
>
> I have a feeling I'm forgetting something fairly easy and stupid, but
> I
> can't seem to see what it is. Anyone have any suggestions?
>
Dial(SCCP/[EMAIL PROTECTED])
--
Jason Parker
Digium
___
--Bandwidth
On Tue, Apr 10, 2007 at 02:51:31PM -0500, Lacy Moore - Aspendora wrote:
> On 4/10/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> >exten => 104,Dial(SCCP/SEP00036BC3852B,20)
> >exten => 104,2,Voicemail(u104)
> >exten => 104,102,Voicemail(b104)
> >exten => 104,103,Hangup()
> >
>
> Off the top of
On 4/10/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
exten => 104,Dial(SCCP/SEP00036BC3852B,20)
exten => 104,2,Voicemail(u104)
exten => 104,102,Voicemail(b104)
exten => 104,103,Hangup()
Off the top of my head, I would say that your dial statement should be
Dial(SCCP/104,20). You should be
I have a new asterisk installation (1.4.2) that is working fine with
SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP
(latest chan_sccp).
I have the phones booted, and the tftp directory all setup, etc. But
the phones do not quite work right. When I lift the handset I only get
a
