Hi,
Ok, I got a working setup where the * server having the telephony card
has a fixed internet IP address (serverA). I am using an IAX trunk from
this server to an other one which has a dynamic IP address and is behind
a NAT firewall (serverB).
Everything works fine untill serverB
trunk behing NAT with dynamic IP
Hi,
Ok, I got a working setup where the * server having the telephony card
has a fixed internet IP address (serverA). I am using an IAX trunk from
this server to an other one which has a dynamic IP address and is behind
a NAT firewall (serverB).
Everything
If that doesn't work, the OP can set up a cron job to do a IAX2 Reload
every 5 minutes like I did. I have the exact same problem.
I hope the OP reports back if that works, because I would rather add
the host statement than run a cron job every 5 minutes.
On 8/8/06, Jon Schøpzinsky [EMAIL
Would that show serverA the NAted IP address (192.168.10.xxx) or serverB ?
Message: 14
Date: Tue, 8 Aug 2006 14:16:10 +0200
From: Jon Sch?pzinsky [EMAIL PROTECTED]
Subject: SV: [asterisk-users] IAX trunk behing NAT with dynamic IP
To: Asterisk Users Mailing List - Non-Commercial Discussion
On 07:51, Tue 08 Aug 06, DM wrote:
If that doesn't work, the OP can set up a cron job to do a IAX2 Reload
every 5 minutes like I did. I have the exact same problem.
I hope the OP reports back if that works, because I would rather add
the host statement than run a cron job every 5 minutes.