Hello
You should use qualify=310 ( any value in millisec ) .. qualify=yes
is not proper .
I am not sure about how asterisk's dnsmgr manages dns refreshing but
maybe someone else can answer that question .
On 10/06/07, Ronaldo Z. Afonso <[EMAIL PROTECTED]> wrote:
Hi Jaswinder,
That is what I di
Hi Ronaldo -
I have a IAX trunk between two asterisk servers, both with dynamic IP
and both have a DNS name associated with it.
In the iax.conf file I configure the "host" parameter with the DNS name
of the servers. Everything works fine until one of these servers get a
new IP, so the other can'
Hi Jaswinder,
That is what I did. The thing now is, when I set "enable=yes" in
/etc/asterisk/dnsmgr, Asterisk stops sending IAX POKE messages to the
remote peer (to keep the trunk up).
I've searched on the Internet but I couldn't find any documentation
about how "DNS update manager" works for
In your no-ip client set it to update ip every 2 minutes or so . and
/etc/asterisk/dnsmgr.conf set refresh interval as 30-40 by defualt
its 300 ( 5 minutes)
On 10/06/07, Ronaldo Z. Afonso <[EMAIL PROTECTED]> wrote:
Hi Matt,
Every time I do that, IAX stop sending the POKE messages (necessary fo
Hi Matt,
Every time I do that, IAX stop sending the POKE messages (necessary for
trunk management).
Do you know what could be happening?
Thanks.
Ronaldo.
Matt wrote:
*set "enable=yes" in the "[general]" section of
/etc/asterisk/dnsmgr.conf*
--
*set "enable=yes" in the "[general]" section of /etc/asterisk/dnsmgr.conf*
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asteris
On 6/9/07, Ronaldo Z. Afonso <[EMAIL PROTECTED]> wrote:
First of all, thanks for your help. I just want to check if I understood.
If a set the TTL for 10 seconds for host.no-ip.org and configure the
parameter host as "host=host.no-ip.org", Asterisk will try to find the
IP address of host.no-ip.or
Hi Noah,
First of all, thanks for your help. I just want to check if I understood.
If a set the TTL for 10 seconds for host.no-ip.org and configure the
parameter host as "host=host.no-ip.org", Asterisk will try to find the
IP address of host.no-ip.org each 10 seconds? That is it?
Thanks again
Hi all,
I have a IAX trunk between two asterisk servers, both with dynamic IP
and both have a DNS name associated with it.
In the iax.conf file I configure the "host" parameter with the DNS name
of the servers. Everything works fine until one of these servers get a
new IP, so the other can't f
