Dears;
How I can increase the voice volume in the analogue line (at dahdi port)
without getting a problems in the entered digits (when using Background
function)?
I got to know previously that it is possible to increase the gain at hardware
and not software, this is better to avoid getting a
cancellation. Try the
PBXMate to see it resolves the problem in your case.
Regards,
Valer
From: bilal ghayyad bilmar...@yahoo.com
To: asterisk-users@lists.digium.com
Sent: Thursday, May 10, 2012 2:11 PM
Subject: [asterisk-users] Increasing voice volume without
Dear;
I am talking about something else.
When I said increasing the volume from the hardware, I was mean something else.
Before when we were using Zaptel, we were able to do this (increasing the
volume from the hardware) in the /etc/modprobe.conf but currently we are using
dahdi and I do not
@lists.digium.com
Subject: Re: [asterisk-users] Increasing voice volume without getting echo
or entered digit problem
Dear;
I am talking about something else.
When I said increasing the volume from the hardware, I was mean something
else. Before when we were using Zaptel, we were able to do this (increasing
On Thu, May 10, 2012 at 11:36:51AM -0700, bilal ghayyad wrote:
When I said increasing the volume from the hardware, I was mean
something else. Before when we were using Zaptel, we were able to
do this (increasing the volume from the hardware) in the
/etc/modprobe.conf but currently we are
I am sure there should be another place .. if I increased it from
chan_dahdi.conf, the voice quality is bad and the calls will disconnecting
while we are talking ..
Increasing voice volume from chan_dahdi means increasing it at software level,
I am sure there is a place to increase it at