Hi list!
We currently have a PRI gateway composed by a box with two Digium quad-span
PRI cards (a TE420 and a ).
One of the cards is filled with TELCO1, while the other has first two slots
filled with TELCO2, and 3rd slot with TELCO3.
I am currently having (timer ?) issues on TELCO3 (span 7)
Just a follow up with a bit more information
asterisk*CLI module show like timing
Module Description Use
Count
res_timing_pthread.so pthread Timing Interface 0
*res_timing_dahdi.soDAHDI Timing Interface
Is there a problem having 2 telcos on the same PRI card?
I think you go with one master timer as the Telco. Then the other spans
are secondary, tertiary, quaternary timers.
Adrian
--
_
-- Bandwidth and Colocation
On Fri, Mar 18, 2011 at 3:15 PM, Tiago Geada tiago.ge...@gmail.com wrote:
Just a follow up with a bit more information
asterisk*CLI module show like timing
Module Description Use
Count
res_timing_pthread.so pthread Timing
On Fri, Mar 18, 2011 at 3:17 PM, Adrian Serafini
adrian-li...@wombit.com wrote:
Is there a problem having 2 telcos on the same PRI card?
I think you go with one master timer as the Telco. Then the other spans are
secondary, tertiary, quaternary timers.
Adrian
Adrian
This only works when
Hi! I can try that tho. Where do I configure what timer to use??!
Thanks in advance.
On 18 March 2011 18:21, Andrew Latham lath...@gmail.com wrote:
On Fri, Mar 18, 2011 at 3:17 PM, Adrian Serafini
adrian-li...@wombit.com wrote:
Is there a problem having 2 telcos on the same PRI card?
OK I found it.
In /etc/dahdi/system.conf
I have for this span:
# Span 7: TE4/1/3 T4XXP (PCI) Card 1 Span 3 HDB3/CCS/CRC4
span=7,7,0,ccs,hdb3,crc4
# termtype: te
bchan=187-201,203-217
dchan=202
echocanceller=mg2,187-201,203-217
should I use span=7,*5*,0,ccs,hdb3,crc4 instead? (5 is the first
On 03/18/2011 01:23 PM, Tiago Geada wrote:
Hi! I can try that tho. Where do I configure what timer to use??!
If your telcos are not synchronizing their network clocks to each other,
you will not be able to solve this problem on a multi-port Digium T1/E1
card. Digium T1/E1 cards select a
Sorry to keep bugging, but after making changes to /etc/dahdi/system.conf,
do I need unload res_timing_dahdi.so and chan_dahdi.so; and load them, or
can I just reload them??
Thanks in advance
On 18 March 2011 18:26, Tiago Geada tiago.ge...@gmail.com wrote:
OK I found it.
In
18, 2011 1:31 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] One PRI card with 2 (or more) Telcos
Sorry to keep bugging, but after making changes to /etc/dahdi/system.conf,
do I need unload res_timing_dahdi.so and chan_dahdi.so; and load them
Hi Kevin,
Thanks for your elaborated answer. I will try and set them on the same clock
and see if no problem occurs. If so, Different telco's clocks would be in
SYNC (I do doubt it).
This machine has no more PCI slots available and hardware is damn expensive.
Will have to look into it with my
11 matches
Mail list logo
