Michelle Dupuis wrote:
I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a Meridian
Option 61C. Calls either way drop with error Channel 0/23, span 1 got
hangup, cause 100. Can anyone offer insight into the cause and
solution/workaround? (I tried upgrading to Ast 1.4.13,
: [asterisk-users] PRI over T1 calls dropping, cause 100
Michelle Dupuis wrote:
I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a
Meridian Option 61C. Calls either way drop with error
Channel 0/23, span 1 got
hangup, cause 100. Can anyone offer insight into the cause
PROTECTED] On Behalf Of Andres
Sent: Tuesday, October 30, 2007 11:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PRI over T1 calls dropping, cause 100
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Handle Q
On 10/31/07, Michelle Dupuis [EMAIL PROTECTED] wrote:
The T1 was setup as tie line, not a trunk. The Bell guy tried setting up
the line 2 ways:
1. As a trunk. This did not work because:
a) When he typed in the access code for the trunk on a phone set (and
then any numbers), the call
I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a Meridian
Option 61C. Calls either way drop with error Channel 0/23, span 1 got
hangup, cause 100. Can anyone offer insight into the cause and
solution/workaround? (I tried upgrading to Ast 1.4.13, and upgrading
matching zaptel
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Processing IE 108 (cs0, Calling Party Number)
The Meridian is trying to Invoke the Remote Operations Service Element
(ROSE). That is used to support interactive
