Dear All,
Is it possible to install * in front of a Avaya IP 406 system via a T
connector E1 tap so it's external to the Avaya system?
We would like to record upto 60 channels (2 * ISDN30e). This may increase
later.
Also, could the calls go into the cdr for retrieval/browsing later?
What
-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Gavin Henry
Sent: April 20, 2007 9:07 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Passive E1 Pri Tap for Voice Recording
Dear All,
Is it possible to install * in front of a Avaya IP 406 system
Of Gavin Henry
Sent: April 20, 2007 9:07 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Passive E1 Pri Tap for Voice Recording
Dear All,
Is it possible to install * in front of a Avaya IP 406 system via a T
connector E1 tap so it's external to the Avaya system?
We would
I did this with a Nortel MICS a few years ago. No problem.
The dialplan was something like:
[incoming]
exten = _X.,1,setvar(filename) ;We did something with callerid and call
date and time, but I can't really remember
exten = _X.,2,Monitor(filename)
exten = _X.,3,Dial(Zap/G2/${EXTEN})
On 20/04/07, David Gomillion [EMAIL PROTECTED] wrote:
I did this with a Nortel MICS a few years ago. No problem.
The dialplan was something like:
[incoming]
exten = _X.,1,setvar(filename) ;We did something with callerid and call
date and time, but I can't really remember
exten =
Gavin Henry wrote:
Dear All,
Is it possible to install * in front of a Avaya IP 406 system via a T
connector E1 tap so it's external to the Avaya system?
Voicetronix has an open sourced solution using their OpenPRI in Hi-Z mode.
http://www.voicetronix.com/open-source.htm#logger
Leo
On 21/04/07, Leo Ann Boon [EMAIL PROTECTED] wrote:
Gavin Henry wrote:
Dear All,
Is it possible to install * in front of a Avaya IP 406 system via a T
connector E1 tap so it's external to the Avaya system?
Voicetronix has an open sourced solution using their OpenPRI in Hi-Z mode.