On Thu, May 19, 2011 at 1:24 PM, Ryan Wagoner wrote:
> I updated my phones to the UCS 3.3.1 firmware a few months back. The
> scenario is I place a call and receive an incoming call. With 3.3.1
> the screen will show call 1/2 and I have to press the down arrow to
> see the caller name / number. Ha
I updated my phones to the UCS 3.3.1 firmware a few months back. The
scenario is I place a call and receive an incoming call. With 3.3.1
the screen will show call 1/2 and I have to press the down arrow to
see the caller name / number. Has anybody else noticed this with
3.3.1? I had thought with 3.2
On 02/17/2011 02:23 PM, Ryan Wagoner wrote:
[snip]
The color screen must be different or it is a firmware bug. Was it any
different on 3.2.x vs 3.3.x? On my IP550 you can still read the screen
I have not tried firmware 3.2.x. I'll give that a try once I figure out
the old config system.
wit
On 02/17/2011 02:26 PM, ERIC HERRON wrote:
Yeah it’s the same thing; I think.
I think we have different config files…are you using the split?
Unfortunately I have no idea what "the split" means. Can you please explain?
Regards,
Patrick
--
_
On 02/17/2011 02:28 PM, ERIC HERRON wrote:
I have ind.pattern.
In firmware version 3.3.1? I have only found a reference to ind.pattern
in the Simplify Configuration Improvements Guide which you mentioned
yesterday. Afaict there is no ind.pattern section in the 3.3.0 Admin
Guide and the examp
-Commercial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On 02/17/2011 03:20 AM, Ryan Wagoner wrote:
[snip]
> which it is under. My 3.2.x config file worked except for
> alert info, ringer, and feature settings, which was outli
iling List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On 02/17/2011 12:17 AM, ERIC HERRON wrote:
> To disabled the mwi chirp can be set to silence.
>
> se.pat.misc.1.inst.1.type="silence" ..
This did not work but looking at the example files i
On Thu, Feb 17, 2011 at 12:02 AM, Patrick Lists
wrote:
> No parameters were rejected. Maybe my perception of "backlight off" is
> incorrect. When it is off I expect it so be similar to a Cisco 7961. So no
> light whatsoever and very hard to read in dim light. Yet in the Idle state
> the screen of
On 02/17/2011 12:17 AM, ERIC HERRON wrote:
To disabled the mwi chirp can be set to silence.
This did not work but looking at the example files in the 3.3.1 firmware
the snippet below did work (mind the line wrap!). Well, it no longer
makes the stupid sound but it still gets called so it wake
On 02/17/2011 03:20 AM, Ryan Wagoner wrote:
[snip]
which it is under. My 3.2.x config file worked except for
alert info, ringer, and feature settings, which was outlined in
Simplified_Configuration_Improvements_in_UC_Software3_3_0_TB60519.pdf
Just went through that doc. Interesting read. When
Behalf Of Patrick Lists
Sent: Wednesday, February 16, 2011 9:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On 02/17/2011 12:17 AM, ERIC HERRON wrote:
[snip]
> I am trying the different firmwares now to see if it makes any differe
On Wed, Feb 16, 2011 at 8:38 PM, Patrick Lists
wrote:
> On 02/17/2011 12:10 AM, Ryan Wagoner wrote:
>>
>>
>> > up.backlight.onIntensity="3">
>>
>>
>
> Here's what I have:
>
> up.idleTimeout="10"
> up.backlight.idleIntensity="0"
> up.backlight.onIntensity="3">
> />
>
> That's obviou
On 02/17/2011 12:17 AM, ERIC HERRON wrote:
[snip]
I am trying the different firmwares now to see if it makes any difference.
In the admin guide I just came across: up.oneTouchVoiceMail default 0
If set to 1, the voice mail summary display is bypassed and voice mail
is dialed directly (if conf
On 02/17/2011 12:17 AM, ERIC HERRON wrote:
I haven’t played with the backlights yet.
One annoyance at a time.
Agreed :)
To disabled the mwi chirp can be set to silence.
Thanks for the tip Eric. The "MESSAGE_WAITING" part was not what I had
in my config. I'll give it a try.
I am trying
On 02/17/2011 12:10 AM, Ryan Wagoner wrote:
[snip]
Backlight works fine on a IP550 with 3.3.1 . I have mine set to off
when idle. I like that the 3.3.x series doesn't required the default
sip.cfg and phone1.cfg files. The structure of the XML seems cleaner
and more consistent.
rcial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On Wed, Feb 16, 2011 at 5:49 PM, Patrick Lists
wrote:
> I share your pain. I have an IP335 and IP670 here. Have not configured the
> IP335 yet but using the latest Admin Guide (3.3.1) did configure the IP670
> running the latest
On Wed, Feb 16, 2011 at 5:49 PM, Patrick Lists
wrote:
> I share your pain. I have an IP335 and IP670 here. Have not configured the
> IP335 yet but using the latest Admin Guide (3.3.1) did configure the IP670
> running the latest bootrom (4.3.0) and firmware (3.3.1). Problems on the
> IP670:
>
> 1)
On 02/16/2011 09:43 PM, ERIC HERRON wrote:
On IP430s
cat sip.ver
VVX-1500 3.2.2.0481
All others 3.2.2.0477
2345-11402-001.bootrom.ld & sip.ld
Phone1.cfg
I share your pain. I have an IP335 and IP670 here. Have not configured
the IP335 yet but using the latest Admin Guide (3.3.1) did config
cial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On Wed, Feb 16, 2011 at 3:05 PM, ERIC HERRON wrote:
> I have it on the 430s.
>
>
>
> I think it's a firmware issue but I am having trouble replicating it on
the
> 430
>
>
>
> I could have sworn I h
On Wed, Feb 16, 2011 at 3:05 PM, ERIC HERRON wrote:
> I have it on the 430s.
>
>
>
> I think it’s a firmware issue but I am having trouble replicating it on the
> 430
>
>
>
> I could have sworn I had it on one phone before I rebooted it but memory
> might be influenced by hopes.
>
What setting w
-boun...@lists.digium.com] On Behalf Of Ryan Wagoner
Sent: Wednesday, February 16, 2011 3:03 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom IP335
On Wed, Feb 16, 2011 at 2:51 PM, ERIC HERRON wrote:
> I am posting here since you guys are my l
On Wed, Feb 16, 2011 at 2:51 PM, ERIC HERRON wrote:
> I am posting here since you guys are my last hope.
>
>
>
> I am trying to configure a Polycom Soundpoint IP 335 with MWI.
>
> Is there any way to eliminate the scrolling messages and Msgs softkey?
>
> I am trying to get it where it’s just the l
Subject: Re: [asterisk-users] Polycom IP335
On Wed, Feb 16, 2011 at 4:51 PM, ERIC HERRON wrote:
> I am posting here since you guys are my last hope.
>
>
>
> I am trying to configure a Polycom Soundpoint IP 335 with MWI.
>
> Is there any way to eliminate the scrolling mess
On Wed, Feb 16, 2011 at 4:51 PM, ERIC HERRON wrote:
> I am posting here since you guys are my last hope.
>
>
>
> I am trying to configure a Polycom Soundpoint IP 335 with MWI.
>
> Is there any way to eliminate the scrolling messages and Msgs softkey?
>
> I am trying to get it where it’s just the l
I am posting here since you guys are my last hope.
I am trying to configure a Polycom Soundpoint IP 335 with MWI.
Is there any way to eliminate the scrolling messages and Msgs softkey?
I am trying to get it where it's just the light that indicates the new
messages.
I don't know if Asterisk h
25 matches
Mail list logo
