I use :
exten = 5600,3,Macro(dialout-trunk,0,91248XXX,,)
Mind you that I am using FreePBX, so I am using the dialout-trunk macro.
But before I used FreePBX, I would do the same with Dial.
5600 is a DID number that gets forwarded outside.
--
--
Steven
http://www.glimasoutheast.org
Dan
I gave that a try but had no luck. I keep getting all circuits busy.
Perhaps there is another way.
I think it is having trouble when transfering zap to zap.
but no matter what i do i can't get it.
I made a sip number to try from, but its not working
[ext-local-custom]
;exten =
I actually have it semi-working. My trunks were set up improperly.
Now i can do it, but only if i specify a specific zap channel.
exten = 299,1,Macro(dialout,2,1914304,,)
the 2 takes me to zap 1. I tried to replace that with "s" but no luck..
any idea how to do this where it will pick
On 8/3/06, Dan Casey [EMAIL PROTECTED] wrote:
I actually have it semi-working. My trunks were set up improperly.
Now i can do it, but only if i specify a specific zap channel.
exten = 299,1,Macro(dialout,2,1914304,,)
the 2 takes me to zap 1. I tried to replace that with s but no
Greg Broiles wrote:
On 8/3/06, Dan Casey [EMAIL PROTECTED] wrote:
I actually have it semi-working. My trunks were set up improperly.
Now i can do it, but only if i specify a specific zap channel.
exten = 299,1,Macro(dialout,2,1914304,,)
the 2 takes me to zap 1. I tried to replace
