Greetings-
I currently have a customer that *requires* key-system functionality in an
Asterisk PBX. On a SIP phone, the BLF keys need to show the current state of
the analog lines attached to the system (DAHDI FXO). By pressing one of these
keys (for line 1 for example), the dialed number
On 01/26/2012 09:46 AM, Tim Nelson wrote:
Greetings-
I currently have a customer that *requires* key-system functionality in an
Asterisk PBX. On a SIP phone, the BLF keys need to show the current state of
the analog lines attached to the system (DAHDI FXO). By pressing one of these
keys (for
- Original Message -
On 01/26/2012 09:46 AM, Tim Nelson wrote:
Greetings-
I currently have a customer that *requires* key-system functionality
in an Asterisk PBX. On a SIP phone, the BLF keys need to show the
current state of the analog lines attached to the system (DAHDI
On Thu, 2012-01-26 at 10:48 -0600, Tim Nelson wrote:
- Original Message -
On 01/26/2012 09:46 AM, Tim Nelson wrote:
Greetings-
I currently have a customer that *requires* key-system functionality
in an Asterisk PBX. On a SIP phone, the BLF keys need to show the
current
On 26-01-12 18:08, Jeff LaCoursiere wrote:
[snip]
I'm also very interested in working examples, especially if someone has
set it up for SIP termination trunks rather than Dahdi.
Maybe I am missing something here but why would you want to emulate a
keysystem with analog (thus single call)
, 2012 11:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] SLA for DAHDI FXO - Emulating Key System
Functionality
On 26-01-12 18:08, Jeff LaCoursiere wrote:
[snip]
I'm also very interested in working examples, especially if someone
has set it up for SIP
On Thu, 2012-01-26 at 18:21 +0100, Patrick Lists wrote:
On 26-01-12 18:08, Jeff LaCoursiere wrote:
[snip]
I'm also very interested in working examples, especially if someone has
set it up for SIP termination trunks rather than Dahdi.
Maybe I am missing something here but why would you
Hi
For this scenario you can use the group and group_count functions and create
a hint dialplan like this:
exten = trunkname,hint,custom:trunkname
When you reach the maximum number of available channels set the hint in use:
Set(DEVICE_STATE(Custom:confcorso)=INUSE)
To remove:
