Update on my problem.
After a few days of speaking with various folks at ATT, the issue has
been resolved. When we first ordered our PRI lines, they were
supposed to be without screening tables (per ATT suggestion on how we
can set CID numbers to numbers not associated with the PRI). However,
Hi list. I've googled around for this, and so far have come up short.
I'm attempting to set the outbound callerid when making a call using
our PRI. I've talked with ATT (the providor) and they have said the
screening table has been disabled, so anything my phone system sends
for callerid should
use pri debugging (pri debug span 1) to verify if the data sent on the
PRI line is correct! (e.g. type on number, ...)
verify with an incoming call and set the same format on outgoing calls.
regards
klaus
Jon Moore schrieb:
Hi list. I've googled around for this, and so far have come up
On Tue, Nov 10, 2009 at 10:39 AM, Klaus Darilion
klaus.mailingli...@pernau.at wrote:
use pri debugging (pri debug span 1) to verify if the data sent on the
PRI line is correct! (e.g. type on number, ...)
verify with an incoming call and set the same format on outgoing calls.
This is what I
Jon Moore wrote:
I changed the line in extensions.conf to be SET(CALLERID(ALL)=Corner
Homecare2703653903)
To match what it appears I'm getting from ATT, only the 10 digit number.
We've got ATT out of the Detroit area, you can't set callerid name,
only number. So, try:
exten =
On Tue, Nov 10, 2009 at 11:43 AM, Doug Lytle supp...@drdos.info wrote:
Jon Moore wrote:
I changed the line in extensions.conf to be SET(CALLERID(ALL)=Corner
Homecare2703653903)
To match what it appears I'm getting from ATT, only the 10 digit number.
We've got ATT out of the Detroit area,
Subject: Re: [asterisk-users] Setting outgoing callerid on when using a PRI
On Tue, Nov 10, 2009 at 11:43 AM, Doug Lytle supp...@drdos.info wrote:
Jon Moore wrote:
I changed the line in extensions.conf to be SET(CALLERID(ALL)=Corner
Homecare2703653903)
To match what it appears I'm getting from ATT
Jon Moore wrote:
Did you have to provide ATT with a list of numbers you would be
setting, or does it Just Work?
In our Detroit and Indianpolis installs, it just worked. In our Battle
Creek installs, we can only set the numbers to DIDs that we directly own.
Doug
--
Ben Franklin
Jon Moore wrote:
On Tue, Nov 10, 2009 at 11:43 AM, Doug Lytlesupp...@drdos.info wrote:
Jon Moore wrote:
Here is what I have in our zaptel.conf
span=1,1,0,esf,b8zs
defaultzone=us
loadzone=us
bchan=1-23
dchan=24
And our zapata.conf:
switchtype=national
context=pri
AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Setting outgoing callerid on when using a PRI
Jon Moore wrote:
I changed the line in extensions.conf to be SET(CALLERID(ALL)=Corner
Homecare2703653903)
To match what it appears I'm getting from ATT, only
Jon Moore wrote:
On Tue, Nov 10, 2009 at 11:43 AM, Doug Lytle supp...@drdos.info wrote:
Jon Moore wrote:
I changed the line in extensions.conf to be SET(CALLERID(ALL)=Corner
Homecare2703653903)
To match what it appears I'm getting from ATT, only the 10 digit number.
We've got ATT out of the
Dave Fullerton wrote:
Note num and not number I don't know if that was a change from 1.4
to 1.6 or if Doug mistyped it.
Not a mistype. I've been using number all along, but looking at the
docs shows that I've been incorrect. It must concatenate the number
down to num. Looks like I've
Doug Lytle wrote:
Dave Fullerton wrote:
Note num and not number I don't know if that was a change from 1.4
to 1.6 or if Doug mistyped it.
Not a mistype. I've been using number all along, but looking at the
docs shows that I've been incorrect. It must concatenate the number
down to
, November 10, 2009 1:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Setting outgoing callerid on when using a PRI
Doug Lytle wrote:
Dave Fullerton wrote:
Note num and not number I don't know if that was a change from 1.4
to 1.6 or if Doug mistyped
Jason Parker wrote:
Doug Lytle wrote:
Dave Fullerton wrote:
Note num and not number I don't know if that was a change from 1.4
to 1.6 or if Doug mistyped it.
Not a mistype. I've been using number all along, but looking at the
docs shows that I've been incorrect. It must concatenate
Dave Fullerton wrote:
lol. Love it. I want to use that in my dialplan just to make my
successor go WTF?
I almost lost a mouth full of coffee!!
*snicker*
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither
Discussion
Subject: Re: [asterisk-users] Setting outgoing callerid on when using a PRI
Dave Fullerton wrote:
lol. Love it. I want to use that in my dialplan just to make my
successor go WTF?
I almost lost a mouth full of coffee!!
*snicker*
Doug
--
Ben Franklin quote:
Those who
17 matches
Mail list logo