Just for records. I have got red light on Rx loss on keymile pri modem
because
I did not make good pinout on my cable. Right pinout is 1 2 4 5 and 1 2 4 5
(4 wires)
on both Rj-45 conncectors not 1 2 4 5 and 4 5 1 2 as I made. After I made
cable
right red light disappeared.
Other problem was that t
On Fri, Dec 5, 2008 at 8:14 AM, Uros Djokic <[EMAIL PROTECTED]> wrote:
> Thanks for reply. I think I already made a crossover cable :
> pins 1,2,4,5 and 4,5,1,2 and I still see red light on modem.
>
> pin 1 is in rj45-1 and is going to pin 4 in rj45-2 (orange with white
> stripe)
> pin 2 is in rj45
hi
the line "We think we are cpe but they think they are cpe too"
means in the mmm /etc/asterisk/chan_dahdi.conf or in
/etc/asterisk/zapata.conf you told the the card act as cpe but in a
conection mst be one cpe and one net if both are net or you make a loopback
you will have that.
and the colores
Thanks for reply. I think I already made a crossover cable :
pins 1,2,4,5 and 4,5,1,2 and I still see red light on modem.
pin 1 is in rj45-1 and is going to pin 4 in rj45-2 (orange with white
stripe)
pin 2 is in rj45-1 and is going to pin 5 in rj45-2 (solid orange)
pin 4 is in rj45-1 and is going
Next time I'll be sure to finish my morning coffee before posting. 8-)
Tony Mountifield wrote:
> In article <[EMAIL PROTECTED]>,
> Eric \"ManxPower\" Wieling <[EMAIL PROTECTED]> wrote:
>> There is a loopback somewhere on the line. Contact your telco and say
>> "I see a loopback on the line. Pl
On 12/4/08, Steve Edwards <[EMAIL PROTECTED]> wrote:
> On Thu, 4 Dec 2008, Steve Totaro wrote:
>
> > I would try setting zaptel to pri_net before calling the telco.
> >
> > If it works, you just saved yourself (possibly) hours of being bounced
> > around from person to person and sitting on hold, n
On Thu, 4 Dec 2008, Steve Totaro wrote:
> I would try setting zaptel to pri_net before calling the telco.
>
> If it works, you just saved yourself (possibly) hours of being bounced
> around from person to person and sitting on hold, not to mention being
> on hold or transfered and getting droppe
Some telco switches just behave this way, either by design or
misconfiguration. It is much easier to reconfigure your switch ;-)
than the telco's.
Not sure what switch Quest had me on, it may have been a DMS100 but I
don't recall. Anyways, pri_net worked and has been working for over
two years n
I would try setting zaptel to pri_net before calling the telco.
If it works, you just saved yourself (possibly) hours of being bounced
around from person to person and sitting on hold, not to mention being
on hold or transfered and getting dropped and having to start all over
again.
Path of least
In article <[EMAIL PROTECTED]>,
Eric \"ManxPower\" Wieling <[EMAIL PROTECTED]> wrote:
> There is a loopback somewhere on the line. Contact your telco and say
> "I see a loopback on the line. Please remove it."
I don't think this is correct. The OP below said that he put the loopback
on himself,
There is a loopback somewhere on the line. Contact your telco and say
"I see a loopback on the line. Please remove it."
Uros Djokic wrote:
> Hi I have problem with TE121 Digium card. I connected it to modem keymile
> Music 200 (provided by telco) but I can see 2 red lights on modem (both
> bell
-
On 12/4/08, Uros Djokic <[EMAIL PROTECTED]> wrote:
> Hi I have problem with TE121 Digium card. I connected it to modem keymile
> Music 200 (provided by telco) but I can see 2 red lights on modem (both
> bellow words rx) and my card is red too. I tried to make experiment and made
> loopback (pins
Hi I have problem with TE121 Digium card. I connected it to modem keymile
Music 200 (provided by telco) but I can see 2 red lights on modem (both
bellow words rx) and my card is red too. I tried to make experiment and made
loopback (pins 1 4 , 2 5) and put it in card and card become green (I hope
t
13 matches
Mail list logo
