On Fri, Jul 23, 2010 at 6:23 PM, bruce bruce wrote:
> I am having this issue with PRI. But I do not use conference rooms. Our
> system is a simple queue and extensions.
>
You will then need to enable PRI debugs and check the IE for
disconnect. The see why Asterisk is not hanging up the channel.
I am having this issue with PRI. But I do not use conference rooms. Our
system is a simple queue and extensions.
-Bruce
On Fri, Jul 23, 2010 at 6:13 PM, Maurizio Faccio adinet <
mauf...@adinet.com.uy> wrote:
> You're right but it do not detect that I hungs on my side of the line.
> I think that
You're right but it do not detect that I hungs on my side of the line.
I think that in some way we are going into a conference in some unwanted
way with the two dadhi channels and when i hang up both lines stay bridged.
I think that the trouble appears when i dial a number in an analog
phone, hoo
Well, what about PRI? Why should this stay on? Isn't the native bridge just
a bridge channel that should go down automatically if the actually Dahdi/ZAP
channel is down and there are no SIP channels on either?
Thanks,
Bruce
On Fri, Jul 23, 2010 at 5:09 PM, Tzafrir Cohen wrote:
> On Fri, Jul 23,
On Fri, Jul 23, 2010 at 05:37:44PM -0300, Maurizio Faccio adinet wrote:
>I guess same trouble with Elastix 1.5.2-2.3
>dahdi 2.1.0.4 19
> Asterisk 1.4.25.1
> Digium TDM 2400
That's an analog card.
With an analog trunk, you're not guaranteed to know if the remote CO has
hung up the lin
I guess same trouble with Elastix 1.5.2-2.3
dahdi 2.1.0.4 19
Asterisk 1.4.25.1
Digium TDM 2400
[Jul 23 16:47:22] DEBUG[18890] chan_dahdi.c: master: 14, slave: 1,
nothingok: 0
[Jul 23 16:47:22] DEBUG[18890] chan_dahdi.c: Stopping tones on 14/0
talking to 1/0
[Jul 23 16:47:22] DEBUG[18890
This is running Elastix (FreePBX), so I am pretty sure there is Hangup()
requested. At least this doesn't happen ALL THE TIME. So, something is
getting stuck.
Thanks,
Bruce
On Fri, Jul 23, 2010 at 9:10 AM, Paul Belanger wrote:
> On Fri, Jul 23, 2010 at 1:16 AM, bruce bruce wrote:
> > Any help
On Fri, Jul 23, 2010 at 1:16 AM, bruce bruce wrote:
> Any help is appreciated.
>
Are you explicitly calling Hangup() within your dial-plans?
--
Paul Belanger | dCAP
Polybeacon | Consultant
Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode)
blog.polybeacon.com
--
Hi Everyone,
Using a PRI with Sangoma A101D and Asterisk 1.4.2.x.
I notice that occasionally after a call is disconnected and both the phone
devices and the the channel is down but the bridge stays open for hours.
Channel Location State Application(Data)
Local/9054445.