I am not sure if the problem is within the system or within a hypervisor or
a vswitch. My test is quite simple - when the traffic is captured from a VM
interface, everything is fine, and there is no sound distortion; but when
the traffic is captured from the hypervisor host interface, wireshark
On Mon, Dec 18, 2017 at 10:22:33AM +, Kseniya Blashchuk wrote:
> To be honest we are a bit afraid to set 100% )), but we have tried to set
> 90% - no luck. I have also tested with 4.8 and 4.11 kernels - same results.
> I will try with Centos 6 and kernel 3.10 to check if something changes.
>
No problem, I will try to test with CentOS if I have time
пн, 18 дек. 2017 г. в 13:33, Dmitriy Ermakov :
> Ok. I am sorry, I don't have any more ideas(
>
> Please, send here email with your testing results.
>
> On 12/18/2017 01:22 PM, Kseniya Blashchuk wrote:
>
> To be
Ok. I am sorry, I don't have any more ideas(
Please, send here email with your testing results.
On 12/18/2017 01:22 PM, Kseniya Blashchuk wrote:
> To be honest we are a bit afraid to set 100% )), but we have tried to
> set 90% - no luck. I have also tested with 4.8 and 4.11 kernels - same
>
To be honest we are a bit afraid to set 100% )), but we have tried to set
90% - no luck. I have also tested with 4.8 and 4.11 kernels - same results.
I will try with Centos 6 and kernel 3.10 to check if something changes.
VSwitch shows 1-2% load on the interfaces, and this host is not overloaded
I am using CentOS 6, kernel 3.10 from elrepo.org kernels
(3.10.102-1.el6.elrepo.x86_64).
Asterisk version is 11.21.2 and Asterisk 13.X.X (I can't get it's
version now).
Is it possible that your network switches' interfaces which are
connected to Hyper-V Server are 100% busy?
It is possible that
Dmitry, are you using CentOS? What kernel version are you using? I will try
with the same to see if it can be also a kernel-related issue.
пн, 18 дек. 2017 г. в 11:35, Kseniya Blashchuk :
> Thank you for a quick answer, Dmitry!
>
> We have tried the settings you suggested but
Thank you for a quick answer, Dmitry!
We have tried the settings you suggested but nothing helped. The machine is
running 4.4.0-104 kernel, 4 cores, Intel(R) Xeon(R) CPU E5-2620 v3 @
2.40GHz, clocksource is hyperv_clocksource_tsc_page, timing module is
res_timing_timerfd.so. We have also tried to
Hi, Kseniya!
I have three installations of Asterisk (as FreePBX but I think it is not
important). They work fine.
I have made some settings in Asterisk and Hyper-V:
Asterisk: timing interface - timerfd.
Hyper-V:
1. Virtual Machine => Network Adapter => Hardware Acceleration =>
Virtual
Hi all!
Does anybody have experience with asterisk on Hyper-V? My test setup with
Ubuntu 16 and asterisk 13.1 (ubuntu repo) shows sound distortion. I have
analyzed the RTP flow with wireshark and I see high skew and delta values
when the traffic leaves the hypervisor, however everything is okay
10 matches
Mail list logo