ubject: Re: [asterisk-users] asterisk ip authentication
hi all,
i've changed allow=all and restarted service.
but still gives 488 Not acceptable here The softswitch sends codec g729.
"core show translation" says codec g729 alsa installed.
On Sun, Jul 28, 2013 at 10:11 PM, Andrew
remove disallow completely
you are basically saying do not allow anything
then allow anything
so remove the disallow part and leave allow
Kind Regards
Andrew Colin
hi Andrew,
here is my sip.conf
[]
host=x.x.x.x
qualify=yes
type=peer
insecure=port,invite
context=from-internal
disallow=all
allow=all
On Mon, Jul 29, 2013 at 9:17 AM, Andrew Colin wrote:
> send me a copy of your sip config also make sure dissallow is before
> allow.
>
>
>
>
>
> Kind Reg
send me a copy of your sip config also
make sure dissallow is before allow.
Kind Regards
Andrew Colin
Technical Director
T:010 591 4358
C: 082 310 3007
and...@vsave.c
hi all,
i've changed allow=all and restarted service.
but still gives 488 Not acceptable here
The softswitch sends codec g729.
"core show translation" says codec g729 alsa installed.
On Sun, Jul 28, 2013 at 10:11 PM, Andrew Colin wrote:
> I just find it insecure because if someone does hack
I just find it insecure because if someone does hack they can use any codec.
I suppose not very insecure but I like to lock things down as much as
possible.
On 7/28/2013 9:09 PM, Matt Behrens wrote:
On Jul 28, 2013, at 2:59 PM, Andrew Colin wrote:
if you say allow=all it will work but th
On Jul 28, 2013, at 2:59 PM, Andrew Colin wrote:
> if you say allow=all it will work but thats not secure at all.
How is allow=all insecure? I can see inefficient, but what would make that
insecure eludes me.
smime.p7s
Description: S/MIME cryptographic signature
--
_
No Acceptable here is a codec error.
Check the other soft switch and see what codecs it is sending.
if you say allow=all it will work but thats not secure at all.
Kind Regards
An
hi,
[]
type=peer
insecure=invite,port
host=x.x.x.x
context=from-internal
disallow=all
allow=g729
allow=alaw
allow=ulaw
allow=gsm
canreinvite=no
nat=no
qualify=yes
this works fine for one softswitch bu i tried another soft switch it gives
SIP/2.0 488 Not acceptable here
error.
Any idea?
On F
Additionally you shoudl take a look at "sip set debug on" (in cli) and
then place a call.
Am 26.07.2013 17:14, schrieb Thorsten Göllner:
You should take a look at this options:
type=friend
context=my_context
host=ip_address
Am 26.07.2013 16:52, schrieb jin jan:
Hi all,
I've tried to sen call
You should take a look at this options:
type=friend
context=my_context
host=ip_address
Am 26.07.2013 16:52, schrieb jin jan:
Hi all,
I've tried to sen calls to asterisk from different soft switch.
I want to define ip authentication(not register) to an extension for
make call through asterisk.
Hi all,
I've tried to sen calls to asterisk from different soft switch.
I want to define ip authentication(not register) to an extension for make
call through asterisk.
Is there any way to make call from asterisk without register. Only ip
authentication.
I tried too many different configurations b
hi
Thanks for replay. now asterisk accepts calls. But 32 second later, calls
drop.
Error code:
-Asterisk-HangupCause: Protocol error, unspecified
X-Asterisk-HangupCauseCode: 111
On Wed, Sep 26, 2012 at 2:47 PM, Carlos Rojas wrote:
> Hello
>
> Yes, there is, in sip.conf you should be using
Hello
Yes, there is, in sip.conf you should be using
Insecure=invite,port for that
Regards
On Sep 25, 2012 4:06 PM, "jin jan" wrote:
> Hi all,
> I've tried to sen calls to asterisk from different soft switch.
> I want to define ip authentication(not register) to an extension for make
> call thr
Hi all,
I've tried to sen calls to asterisk from different soft switch.
I want to define ip authentication(not register) to an extension for make
call through asterisk.
Is there any way to make call from asterisk without register. Only ip
authentication.
Kind Regards.
--
__
15 matches
Mail list logo
