Thanks Matt. The suggestion helped. No more slip erros.
Dave
> Original Message
> Subject: Re: [asterisk-users] dahdi timing source multiple cards
> From: Matthew Fredrickson
> Date: Fri, December 21, 2012 3:41 pm
> To: asterisk-users@lists.digium.com
>
You must make sure that for each card, the timing parameter does not
exceed the number of spans on the card (unless you're using a timing
cable between cards). So you probably don't want to have anything above
a 4 for the timing parameter... I see below that you have 5-12 listed in
the timing
I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting
slips and ask me to update the clock source. I have my system.conf set as
the following but when I run dahdi_scan only the ports on Card 1 are showing
up with syncsrc=1
system.conf :
span=1,1,0,esf,b8zs
bchan=2-24
m