Hi Steve,
Thanks for the reply, I didn't change anything else, just changed spandsp
version to de FFA, I use the spandsp version with more success in other places,
but in this particular case, sending faxes works ok with both versions but with
spandsp I couldn't receive any fax, with FFA I may
On 05/18/2012 04:45 AM, Sebastian Gutierrez wrote:
with FFA I may get 70% of faxes ok.
Nobody that I work with would consider that acceptable.
Lee.
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Sebastian,
Seeing as this an issue related to faxing using the SpanDSP library;
if you do not get an answer leading to a solution here, then you may try
asking on the SpanDSP mailing list
http://lists.soft-switch.org/mailman/listinfo
It's likely that the Asterisk users, specifically using
Hi Sebastian,
has still some issues that not all faxes pass ok, but does the work ==
still badly broken
Your log doesn't seem to show a spandsp error. It looks more like a bad
signal. Did you change anything else when you installed FFA? Usually
people move the other way to improve their
Hi,
I´m with asterisk 1.6.2.20
DAHDI Version: 2.5.0.2 Echo Canceller: HWEC, MG2
SpanDSP: spandsp-0.0.6pre20.tgz
FXO lines.
Sending faxes works ok.
but receiving gives me error:
here is the debug:
http://pastebin.com/qfFeXWQW
any idea??
Thanks!
--
Discussion
Objet : Re: [asterisk-users] fax problem
Oops !
The sendmail macro was missing, sorry !
[macro-Sendmail]
;===
; ARG1 = Address To
; ARG2 = Address From
; ARG3 = File attachment
; ARG4 = Pages Qty
; ARG5 = Rate
Ah ! It's a jamming of Digium FFA user manual, ideas and tests from my
customers and myself.
From Digium's side you can/must acces to this WEB page :
https://www.digium.com/en/supportcenter/documentation/viewdocs/FAX
I love to check Digium's solutions and to know how to use them.
So, I have
Hello,
I need to send a tiff via fax with my asterisk 1.6.1.0.
I tried in the dialplan
[default]
exten = _X.,1,SendFax(/root/test.tiff)
but I have:
salledeconf1*CLI console dial 1...@default
[Dec 23 16:24:22] WARNING[31739]: chan_oss.c:492 setformat: Unable to
re-open DSP
-users-boun...@lists.digium.com] On Behalf Of BERGANZ
François
Sent: Wednesday, December 23, 2009 10:50 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] fax problem
Hello,
I need to send a tiff via fax with my asterisk 1.6.1.0.
I tried in the dialplan
[default]
exten
: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Objet : Re: [asterisk-users] fax problem
Did you stand on one foot and hold out your tongue when you made the tiff??
J The tiff has to be a very specific format
I spent days making my
output tiffs match the format of a received tiff I
BERGANZ François wrote:
I need to send a tiff via fax with my asterisk 1.6.1.0.
I tried in the dialplan
[default]
exten = _X.,1,SendFax(/root/test.tiff)
but I have:
salledeconf1*CLI console dial 1...@default
You are not going to be able to use SendFax on a console
On Wed, Dec 23, 2009 at 10:49 AM, BERGANZ François
franc...@acropolistelecom.net wrote:
Hello,
I need to send a tiff via fax with my asterisk 1.6.1.0.
I tried in the dialplan
[default]
exten = _X.,1,SendFax(/root/test.tiff)
try originate sip/provider/number extension 1...@default
Hi Francois,
here is Francois too ;-)
Check that :
[fax-outbound-calls]
exten = _X.,1,Dial(${ACROPOLIS}/${EXTEN},,G(fax-tx^send^1))
[fax-tx]
exten = send,1,NoOp( SENDING FAX )
exten = send,n,Set(FaxTxDir=/var/spool/fax/tx/)
exten = send,n,Set(FAXFILEPDF=fax-${FAXCOUNT}-tx.pdf)
exten =
...@hamwlan.net]
Envoyé : mercredi 23 décembre 2009 22:44
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : RE: [asterisk-users] fax problem
Hi Francois,
here is Francois too ;-)
Check that :
[fax-outbound-calls]
exten = _X.,1,Dial(${ACROPOLIS}/${EXTEN},,G(fax-tx^send^1))
[fax-tx]
exten
Someone has any idea about this issue? Thank you very much.
Alexandre Leclerc a écrit :
Hi all,
as it is obivious at the bottom of this screen dump, when I'm recieving
a fax from PSTN in the PBX, it fails to send it to extension 100 which
is a fx_oks on my digium card. But I can call
Hi all,
as it is obivious at the bottom of this screen dump, when I'm recieving
a fax from PSTN in the PBX, it fails to send it to extension 100 which
is a fx_oks on my digium card. But I can call succesfully the fax from
another internal phone (polycom ip600).
Here is my zap config (I use
Title: Fax problem, missing/compressed lines
Hi All,
On my * the faxes in- and outbound are of poor quality. Im missing some lines. I tried different fxs ports, different fax-machines, different cables. Low speed on the fax.
Asterisk 1.0.9-BRIstuffed-0.2.0-RC8j
Zapata.conf:
Johan van Tongeren wrote:
On my * the faxes in- and outbound are of poor quality. I’m missing
some lines.
TxFAX and RxFAX don't yet support ECM, and so you're going to miss an
occassional line. The frequency will depend upon the quality of the
connection between the two endpoints.
Lee.
I am having problems receiving faxes through the PSTN. I have installed
asterisk @home ver 1.0.7 and have a TDM11B card installed. When I try to
send faxes to the PSTN line I only get the top part of the fax and then
just gibberish any ideas??
JV
,
Wiley
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jose
Vicente Ortega
Sent: Tuesday, June 07, 2005 3:21 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Fax problem with Asterisk @home ver 1.0.7
I am having problems receiving faxes
I use ulaw and the problem is the same, any more suggestions?
Thanks
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] nombre de Sam Bingner
Enviado el: sábado, 24 de abril de 2004 6:11
Para: [EMAIL PROTECTED]
Asunto: RE: [Asterisk-Users] Fax problem
Use ulaw
Hi,
We have a machine with an *'s with Digium TDM400P and connected wit other
machine with *'s an TDM400P too. Well, I have a fax connected to each
machine, and the protocol in the middle is IAX2 alaw.
The fax between two fax, on in each machine, not work. The fax answer, but
error in comm.
Use ulaw
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pedro Vela
Sent: Friday, April 23, 2004 7:52 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Fax problem
Hi,
We have a machine with an *'s with Digium TDM400P and connected wit other
machine
Hello,
I'm running the 1/14/04 CVS and am having problems with faxes. I've tried
faxing through both a Cisco ATA186 and Sipura SPA2000. I have Asterisk, the
ATA186 and Sipura all hard coded to G711ulaw.
When the fax machine trains, I get a stream of errors in the log file. The
log is attached
24 matches
Mail list logo