I'm trying to allow access to the office from home. But the ip provider
(cablevision) blocks udp 5060. I can see the register packets leaving on
wireshark, but nothing received by office. Changed to port to 6111 and
now the packets show up.
In the server I've set port=6111 in the device in
On 12/26/2011 08:55 AM, sean darcy wrote:
I'm trying to allow access to the office from home. But the ip provider
(cablevision) blocks udp 5060. I can see the register packets leaving on
wireshark, but nothing received by office. Changed to port to 6111 and
now the packets show up.
In the
Kevin P. Fleming wrote:
If you are using a TCP-capable version of Asterisk and a TCP-capable
endpoint, you can try that.
Or,
You can setup OpenVPN, works very well.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve
On 12/26/2011 10:39 AM, Kevin P. Fleming wrote:
On 12/26/2011 08:55 AM, sean darcy wrote:
I'm trying to allow access to the office from home. But the ip provider
(cablevision) blocks udp 5060. I can see the register packets leaving on
wireshark, but nothing received by office. Changed to port
2011/12/26 sean darcy seandar...@gmail.com:
So how do I get * to listen to two different ports?
sip.conf
section [general]
bindport=whatever-port-you-want
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com
On 12/26/2011 04:15 PM, sean darcy wrote:
Thanks for the response. Home asterisk : 10.0.0 - Office: 1.8.8.0
So I thought I'd leave all the sip providers on udp, and move the
home-office to tcp.
And registration just work Just Worked over the default tcp registry
port - which I was surprised
On 12/26/2011 05:06 PM, James Sharp wrote:
On 12/26/2011 04:15 PM, sean darcy wrote:
Thanks for the response. Home asterisk : 10.0.0 - Office: 1.8.8.0
So I thought I'd leave all the sip providers on udp, and move the
home-office to tcp.
And registration just work Just Worked over the default
On 12/26/2011 05:43 PM, Yaroslav Panych wrote:
2011/12/26 sean darcyseandar...@gmail.com:
So how do I get * to listen to two different ports?
sip.conf
section [general]
bindport=whatever-port-you-want
Thanks, but the problem is to get more than 1 port, 5060 and (at least)
one other.
sean
Why not use IAX trunk instead of SIP. This would make it very easy to talk
between the two * systems.
--
Jim Dickenson
mailto:dicken...@cfmc.com
CfMC
http://www.cfmc.com/
On Dec 26, 2011, at 4:07 PM, sean darcy wrote:
On 12/26/2011 05:43 PM, Yaroslav Panych wrote:
2011/12/26 sean
On 12/26/2011 08:17 PM, Jim Dickenson wrote:
Why not use IAX trunk instead of SIP. This would make it very easy to talk
between the two * systems.
I've tried iax. I found the voice quality was better with sip.
YMMV.
sean
--
10 matches
Mail list logo
