Hello,
On Nov/02/2007, Atis Lezdins wrote:
On 11/2/07, Tony Plack [EMAIL PROTECTED] wrote:
We are going to implement MeetMe, but this should still work right?
I had similar issues with 1.4.12 just one time (also topmost zaptel at
are you using Dell PowerEdge servers?
--
Carles Pina i
No, but if you have a hint, I would love it. This is still plaguing me.
Hello,
On Nov/02/2007, Atis Lezdins wrote:
On 11/2/07, Tony Plack [EMAIL PROTECTED] wrote:
We are going to implement MeetMe, but this should still work
right?
I had similar issues with 1.4.12 just one time (also
On Fri, Nov 02, 2007 at 12:51:04PM -0500, Tony Plack wrote:
I have an interesting issue. I am running Asterisk 1.4 (SVN branch latest)
and
same with Zaptel.
If I load ztdummy, my audio in BackGround (or Playback) cannot be heard. If I
rmmod ztdummy and restart Asterisk, Background
I have an interesting issue. I am running Asterisk 1.4 (SVN branch latest) and same with Zaptel.
If I load ztdummy, my audio in BackGround (or Playback) cannot be heard. If I rmmod ztdummy and restart Asterisk, Background works. What am I missing?
SIP clients using g729 with g729 prompts
exten
Tony Plack wrote:
I have an interesting issue. I am running Asterisk 1.4 (SVN branch latest)
and
same with Zaptel.
If I load ztdummy, my audio in BackGround (or Playback) cannot be heard. If
I
rmmod ztdummy and restart Asterisk, Background works. What am I missing?
What things
We are going to implement MeetMe, but this should still work right?
Tony Plack wrote:
I have an interesting issue. I am running Asterisk 1.4 (SVN
branch latest) and same with Zaptel.
If I load ztdummy, my audio in BackGround (or Playback) cannot be
heard. If I rmmod ztdummy and restart
Yes, but if you didn't need MeetMe it would be silly to try to diagnose it.
I suspect ztdummy is loading correctly, but the system is not generating
interrupts for ztdummy sync to. Traditionally ztdummy used a USB
interface to get timing, but at some point I think it switched to using
the
I've seen something similar happen before, and it was due to having drivers
for cards loaded that were not in the system.
Try removing all modules (including ztdummy), then loading ztdummy.
Atis Lezdins wrote:
On 11/2/07, Tony Plack [EMAIL PROTECTED] wrote:
We are going to implement MeetMe,
On 11/2/07, Tony Plack [EMAIL PROTECTED] wrote:
We are going to implement MeetMe, but this should still work right?
I had similar issues with 1.4.12 just one time (also topmost zaptel at
that date). We recompiled everything, and it suddenly worked. But we
had to revert to 1.4.10 because of some
Good try, but no.
All that was loaded was zttranscode and zaptel, but I did unload them.
Here is what is loaded after I rmmod zaptel (and verified with a lsmod)
Module Size Used by
zttranscode 7656 0
ztdummy 5032 0
zaptel183396 1 ztdummy
My revision is 88329
I've
Well I cat /proc/drivers/rtc and get
rtc_time: 15:48:35
rtc_date: 2007-11-02
rtc_epoch: 1900
alarm : 16:30:31
DST_enable : no
BCD : yes
24hr : yes
square_wave : no
alarm_IRQ: no
update_IRQ : no
periodic_IRQ : no
periodic_freq : 1024
batt_status : okay
I
11 matches
Mail list logo
