Hey guys,
I just wanted to thank everyone (particularly Armin) for the assistance
with my new Eicon Diva. I installed it into a new Asterisk 1.2 box this
weekend and the installation was simple and painless, thanks to all your
input.
If anyone else is considering one of these cards, let me
channel.
Cheers
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Avi Miller
Sent: 23 November 2005 20:52
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Eicon Diva Server query
David Waugh wrote:
Yes, you can
David Waugh wrote:
I added a bit the Asterisk wiki to explain hopefully more clearly how to get it
installed.
Great, thanks. Once I have a working /etc/asterisk/capi.conf for the
V-4BRI, I'll be sure to add that to the Wiki page for future reference.
cYa,
Avi
--
National Manager - Special
Hello again.
With the Diva Server 4BRI card - remember that these are in effect 4 CAPI
controllers. Eg CAPI controller 1, controller 2, Controller 3 and Controller 4.
Therefore you should have 4 sections in your CAPI conf as follows.
; CAPI config
;
;
general
nationalprefix=0
install the
chan_capi_cm channel.
Cheers
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Avi Miller
Sent: 23 November 2005 20:52
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Eicon Diva Server query
Erik Slooff ha scritto:
I would like to suggest one small addition for clarity:
you will *need* to have isdn4linux and capi4linux installed on your system
in order to get chan_capi-cm installed.
You just need the capi20 lib in order to use the chan_capi
wget
I would like to suggest one small addition for clarity:
you will *need* to have isdn4linux and capi4linux installed on your
system
in order to get chan_capi-cm installed.
You just need the capi20 lib in order to use the chan_capi
wget
Ok, pay attention to /dev/capi20 device it must exists with the right
permissions
You just need the capi20 lib in order to use the chan_capi
wget
ftp://ftp.isdn4linux.de/pub/isdn4linux/CVS-Snapshots/isdn4k-utils-CVS-2005-10-28.tar.bz2
tar xvjf isdn4k*bz2
cd isdn4*
./configure
make
make
Hi Erik,
You'll have to excuse my ignorance here. But why is this?
I don't have isdn4linux and capi4linux installed but do have
isdn4k-utils-devel-3.2-13.p1.1
isdn4k-utils-3.2-13.p1.1
installed.
Is this for the capi20.h needed for chan_capi to compile?
thanks David
David Waugh ha scritto:
I don't have isdn4linux and capi4linux installed but do have
isdn4k-utils-devel-3.2-13.p1.1
isdn4k-utils-3.2-13.p1.1
Those are old packages, I suggest you to uninstall it and manual compile
the version I posted in a previous release
There are alot of changes in
Hi Erik,
You'll have to excuse my ignorance here. But why is this?
I don't have isdn4linux and capi4linux installed but do have
isdn4k-utils-devel-3.2-13.p1.1
isdn4k-utils-3.2-13.p1.1
installed.
Is this for the capi20.h needed for chan_capi to compile?
thanks David
Hi Dave,
On
David Waugh wrote:
Yes, you can use the Eicon Diva Range with 2.6 Kernels
Another question, considering the card should arrive tomorrow and I'd
like to try my hand at setting it up this weekend: Do I need to BRIstuff
Asterisk to get the Eicon Diva V-4BRI to work, or should I just need
On Thu, 24 Nov 2005, Avi Miller wrote:
David Waugh wrote:
Yes, you can use the Eicon Diva Range with 2.6 Kernels
Another question, considering the card should arrive tomorrow and I'd like to
try my hand at setting it up this weekend: Do I need to BRIstuff Asterisk to
get the Eicon Diva
]
[mailto:[EMAIL PROTECTED] On Behalf Of Avi Miller
Sent: Wednesday, November 23, 2005 3:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Eicon Diva Server query
David Waugh wrote:
Yes, you can use the Eicon Diva Range with 2.6 Kernels
Another question
- asterisk mailing list account
Sent: 18 November 2005 16:13
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Eicon Diva Server query
Avi Miller wrote:
Hello gurus!
I've given up on crappy passive ISDN cards and am heading into the wild
world of real, Active
On Fri, 18 Nov 2005, Avi Miller wrote:
Armin Schindler wrote:
Actually the V-4BRI should be more expensive than the 4BRI. The 'V' does
mean Voice, but this card has more Voice-features besides the standard
4BRI
DSP features (I think it's G.723).
Thanks for that. The quote was AU$400
These cards are very good, the only problem is the price... I bought one
Diva Server 4BRI for 1300 Euros... its a lot...
The configuration of the board is a bit hard but check this link for
help:
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI
Joao
Armin Schindler wrote:
Avi Miller wrote:
Hello gurus!
I've given up on crappy passive ISDN cards and am heading into the wild
world of real, Active Super Dooper Server boards. I have a choice of two
Eicon Diva Server cards:
Eicon Diva Server 4BRI
Eicon Diva Server V-4BRI
Hello,
We've been using an Eicon Diva
On Fri, 18 Nov 2005, Avi Miller wrote:
Hello gurus!
I've given up on crappy passive ISDN cards and am heading into the wild
world of real, Active Super Dooper Server boards. I have a choice of two
Eicon Diva Server cards:
Eicon Diva Server 4BRI
Eicon Diva Server V-4BRI
The V-4BRI is
Armin Schindler wrote:
Actually the V-4BRI should be more expensive than the 4BRI. The 'V' does
mean Voice, but this card has more Voice-features besides the standard 4BRI
DSP features (I think it's G.723).
Thanks for that. The quote was AU$400 less for the V-4BRI, though I'll
double-check
20 matches
Mail list logo
