Title: RE: [Asterisk-Users] Lucent Definity CallerID {Scanned}
This doesn't seem to be it, maybe its the definity release I am using but this seems to be set up properly. There must be a flag elsewhere that doesn't pass internal extentions cid informaiton. Any more suggestions?
Matt
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, 2004-February-27 10:52
Subject: RE: [Asterisk-Users] Lucent Definity CallerID {Scanned}
This doesn't seem to be it, maybe its the definity release I am using but
this seems to be set up properly. There must be a flag elsewhere that
doesn't pass
Title: RE: [Asterisk-Users] Lucent Definity CallerID {Scanned}
Yeah this combined with the earlier information did it, I think most of the confusion stemmed from running definity release 6. Now it works though, its too bad it can't be set on a per trunk basis though. Thanks very much
We are connecting all the lines via ISDN-PRI to TN767 boards.
Matt
On Feb 26, 2004, at 9:14 PM, htguy wrote:
How are you connecting to the definity? Through analog/digital trunk
ports,
analog station ports or digital station (BRI) ports using an Eicon
Card?
I only have Partner and Magix
Ok, I Clipped this from the tek-tips forum for definity and thought it
might help you with your definity CID issue.
FYI the url I got it from is
http://www.tek-tips.com/gviewthread.cfm/lev2/9/lev3/89/pid/690/qid/742640
-Art
r3jnp1 (Programmer) Jan 22, 2004
Can you send
How are you connecting to the definity? Through analog/digital trunk ports,
analog station ports or digital station (BRI) ports using an Eicon Card?
I only have Partner and Magix Systems to test on, but when I get the new
boards I ordered I'll try it out on the Magix with a few configurations. If
