gone away...just like tech stocks, it just gave us a
reprieve for a short while :(
Regards
Josef
-Original Message-
From: Eric Wieling [mailto:[EMAIL PROTECTED]
Sent: August 31, 2004 5:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] T100P
On Tue, 2004-08-31 at 15:58, Pliva, Josef wrote:
> Unfortunately, I am seeing great many missed IRQs continually...if in fact
> it is that which causes the loss of D-channel.
Then you need to find out why interrupts are being locked for long
enough to make the T100P miss interrupts. Common causes
H I guess from a troubleshooting standpoint to try and pinpoint the
problem what I would do is remove all cards from the system and then only
replace the cards that are absolutely necessary like your SCSI card and your
Video card and of course the T100P and then check /proc/interrupts to se
on
Subject: Re: [Asterisk-Users] T100P No D-channels
> Zaptel.conf sets t100p to be the primary sync source for the only span, as
> suggested by many Asterisk users.
I'm trying to understand so please bear with me... The T100P is connected
directly to the Mitel? Or to the Telco through
> Zaptel.conf sets t100p to be the primary sync source for the only span, as
> suggested by many Asterisk users.
I'm trying to understand so please bear with me... The T100P is connected
directly to the Mitel? Or to the Telco through a T1?
What I mean is are calls coming into the Mitel from the t
