Alex Ongena wrote:
Hi,
We are using Asterisk 1.2.1 with Cisco 7940 and 7960 phones.
Most things are running fine ;-)
But, when you are calling and you want to Transfer, you need
to press first on the 'more' button (4th), then you have the
label 'Trnsfr' to Transfer.
these are the lables on
Mark Johnson ha scritto:
I went though the same thing. I don't think you can change the
menus. I simply set up Asterisk to Blind Xfer with the # key. So
instead of using the softkeys, you hit # and then the extension and
off the call goes. It works out nice because if you go to a
these are the lables on the softkeys when having a phone call:
Holt / EndCall / Confrn / more
press more and you get
Transfer / / BlndXfr / more
Is this specific to the SIP firmware? I'm using chan_sccp with a few 7960s
and Transfer is definitely on one of the initial softkeys when
Chris Bagnall wrote:
Is this specific to the SIP firmware? I'm using chan_sccp with a few 7960s
and Transfer is definitely on one of the initial softkeys when on a call.
If it's a SIP thing, you might want to consider using SCCP.
Regards,
Chris
Yes, the SIP image did some pretty strange
Only using SCCP, SIP firmware is set in stone.
Alex Ongena wrote:
Hi,
We are using Asterisk 1.2.1 with Cisco 7940 and 7960 phones.
Most things are running fine ;-)
But, when you are calling and you want to Transfer, you need
to press first on the 'more' button (4th), then you have the
label
