Dear Nicolas Olivier
Just try the florz patch at http://zaphfc.florz.dyndns.org/
and look at cat /proc/interupts if your not sharing irq's
Maybe this will help
Good luck
Sjaak
Hi,
I'm trying to setup a small BRI ISDN - voip gateway.
The ISDN card is based on Cologne chipset, so I try set it up
I recently experienced weird buffer overrun errors with zaphfc which I
eventually identified as being was caused by mismatched memory on the
motherboard.
You might want to check this out.
Stuart
Nicolas Olivier wrote:
Hi,
I'm trying to setup a small BRI ISDN - voip gateway.
The ISDN card is
Just an update, I deoopsed the kernel dump, must be usable...
Nicolas Olivier wrote:
Hi,
I'm trying to setup a small BRI ISDN - voip gateway.
The ISDN card is based on Cologne chipset, so I try set it up with zaphfc.
The versions i'm running:
kernel-2.4.27
Asterisk
Well, afer applying zaphfc_0.2.0-RC8a_florz-6.diff, I'm highly flooded after
ztcfg with:
May 18 18:11:33 gw-ss daemon.crit klogd: zaphfc[0]: b channel buffer underrun:
0, 0
May 18 18:11:33 gw-ss daemon.crit klogd: zaphfc[0]: b channel buffer overflow:
311, 311
May 18 18:11:33 gw-ss
Nicolas,
I replied earlier stating that I saw similar issues and now that you
have applied the Florz patch the symptoms you are seeing are all but
identical to the issues I saw and resolved by changing out the
motherboard memory. The system was an ASUS main board with a Xeon processor.
It is
Nicolas Olivier wrote:
I'm trying to setup a small BRI ISDN - voip gateway.
The ISDN card is based on Cologne chipset, so I try set it up with zaphfc.
The versions i'm running:
kernel-2.4.27
Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e
zaptel modules 1.0.7
zaphfc is from bristuff-0.2.0-RC8e
When I'm doing
Quoting from:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20Zaptel%20Installation
As I haven't got a Digium card, I need a timer which can be provided by
ztdummy, zaprtc or zaprai.
But anyway the results are the same with or without zaprtc loaded.
Peer Oliver Schmidt wrote:
Nicolas
Stuart,
I switched the system to a pentium based host, with different memory.
The results are the same. I've also changed the ISDN card to be sure.
Nicolas
Stuart Hirst wrote:
Nicolas,
I replied earlier stating that I saw similar issues and now that you
have applied the Florz patch the
Nicolas Olivier wrote:
Quoting from:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20Zaptel%20Installation
As I haven't got a Digium card, I need a timer which can be provided by
ztdummy, zaprtc or zaprai.
But anyway the results are the same with or without zaprtc loaded.
Irregardless of