Barry Fawthrop wrote:
Hi All
I have been looking around and haven not been able to find a working example
I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri
1.4.10.2
I use a sangoma A200 card so I am using wanpipe 3.4.7
If I use zaptel which I read I need for
Barry Fawthrop escribió:
Barry Fawthrop wrote:
Hi All
I have been looking around and haven not been able to find a working example
I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri
1.4.10.2
I use a sangoma A200 card so I am using wanpipe 3.4.7
If I use zaptel
Miguel Molina wrote:
Please correct me if I'm wrong, but AFAIK spandsp based fax
applications for asterisk only support a maximum of 9600bps.
No. V.17 (speeds up to 14400 bps) are supported.
Thanks,
Lee.
___
-- Bandwidth and Colocation Provided
Barry Fawthrop wrote:
I have been looking around and haven not been able to find a working example
I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri
1.4.10.2
I use a sangoma A200 card so I am using wanpipe 3.4.7
If I use zaptel which I read I need for app_rxfax
- Barry Fawthrop ba...@isscp.com wrote:
I have a teliax provided SIP phone number which will be the fax number
to receive all faxes
and have them emailed to a central email address, hopefully in PDF
format. where they can
be printed and/or forwarded.
Faxing over VoIP is not likely to
I'm using hylafax/aixmodem for a fax solution. If your SIP DID provider has a
T.38 path to you, faxing should be pretty reliable. I'm on * 1.4 and I'm not
too familiar with current fax offerings in 1.6. Hylafax can be configured to
email incoming faxes as a PDF, or to accept outbound faxes from
out over the
last couple of months.
Travis
- Original Message -
From: Chris Hillman chill...@clearwater-research.com
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, December 23, 2009 7:39:30 AM
Subject: Re: [asterisk-users
Kevin P. Fleming wrote:
Barry Fawthrop wrote:
I have been looking around and haven not been able to find a working example
I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri
1.4.10.2
I use a sangoma A200 card so I am using wanpipe 3.4.7
If I use zaptel which I
You should put something between answer and dial, to let * have time to
get the fax tone: with your dialplan, the call is immediatly bridged to
SIP/3000, so no fax detection happen at all.
A thing like:
exten = s,1,Answer
exten = s,2,Playtones(ring)
exten = s,3,Wait(3) ; if fax tone comes here, *
For us it takes about 6 seconds to detect fax tones, so you should change your
dialplan to either play and audio while detecting fax tones
(NVBackgroundDetect) or Wait for at least 6-7 seconds if using a Zaptel
channel.
On Sat March 25 2006 08:56, Thys de Wet wrote:
Hi There.
I have the
10 matches
Mail list logo
