-Commercial Discussion
*Subject:* Re: [asterisk-users] Connecting Asterisk to Siemens Hipath 3750
Hi guys
Thanks alot for the support.
I have successfully connected the HiPath3750 to the E1 lines and everything
is working fine with the appropriate dial plans. I used Josue's config and
the info
Hi guys
Thanks alot for the support.
I have successfully connected the HiPath3750 to the E1 lines and everything
is working fine with the appropriate dial plans. I used Josue's config and
the info I got from here http://www.voip-info.org/wiki/view/Siemens+Hicom
Well, not everything is working
, March 30, 2011 11:36 AM
To: Josué Conti
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Connecting Asterisk to Siemens Hipath 3750
Hi guys
Thanks alot for the support.
I have successfully connected the HiPath3750 to the E1 lines and everything
Hey Josue,
Thanks alot. I will be expecting the configuration samples. From your
response, I guess QSIG would be better for more functionality between the
two PBXs then..
Yes, this is my first implementation of asterisk and the support I have had
from the mailing lists (some just by searching
Hi,
I got actually an * connected to HiPath 3750 via a trunk of 2xE1, here
is my dahdi config :
/etc/asterisk/chan_dahdi.conf
[channels]
language=fr_FR
usecallerid=yes
hidecallerid=no
callerid=asreceived
restrictcid=no
usecallingpres=yes
pridialplan=unknown
prilocaldialplan=dynamic
Hello Bobola, thanks for your response.
So, I'm using Euroisdn with a Siemens HiPath 3750 and Qsig with Siemens
HiPath 4000.
Because we don't need to facility enable in this case (HiPath 3750) just
ANI interchange between user's, ok?
In another response I was send to you a configurations sample
Thanks guys,
I got the layer1 link up.
Edwin, I will make a cable from this link that you have posted and see if
that also works. Presently, I just did a 'manual' connect of the ends to get
the layer1 up.
Josue, many thanks for your response. Searching through this list archives,
I see that you
Hello Bobola, I'm using a Sangoma card with Siemens HiPath 3750 with ISDN
Protocol with configurations below:
Asterisk:
#zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=us
defaultzone=us
#zapata.conf
[trunkgroups]
[channels]
language=pt_BR
context=default
Hi Josue,
Thanks for your reply.
I have similar settings on my server with CRC4 enabled.
I have a Digium TE210 card on the asterisk server.
The present topology of the network:
Telco---E1Siemens HiPath 3750-Analog
Lines
I want this new scenario
On 3/10/11 6:43 AM, Bobola Oke wrote:
The telco has a DB9 terminated interface straight to the PBX and I cannot make
sense out of the interface for the PBX. What kind of interface is this? How do I
connect the RJ48 of the PRI cards to make this whole setting work.
searching through this
10 matches
Mail list logo