On Sun, 27 May 2007, CSB wrote:
The current RPM
ftp://ftp.melware.net/Trixbox/chan_capi-1.0.1_1.2.14-1.i386.rpm
installs but
This precompiled RPM is for the previous trixbox asterisk version 1.2.14.
A new RPM will follow soon...
I look forward to it.
If you want to
I did it back in the xen 2.x days with a BRI adapter (Traverse NetJet).
It worked fine for the testing I was doing.
I'm not sure of the status or performance of the PCI mapping through to
DomU these days, but that should be the only extra step required.
James
-Original Message-
From:
Hello,
I just want to put all my sip accounts in mysql and asterisk use it from
mysql. How can I do that, could you be more specific because I readed alot
on wiki and i'm lost... I don't know what to modify in Makefile from channel
directory. I use asterisk 1.4.4, that is already compiled and i
Asterisk realtime is what you are looking for. the subject is explained very
clearly including configuration examples and DB schema on the following
links:
http://www.voip-info.org/wiki-Asterisk+RealTime
http://www.asteriskdocs.org/modules/news/article.php?storyid=28
I won't go over the process
Issue was that zapata.conf was specifying trunkgroup for the spans.
This was adding a DS1 Identifier to the setup channel ID, which
the CO does not recognize and so it assigns its own pick of channel.
This was causing a move which asterisk does not cope with.
(Actually, initial channel id being
Forum wrote on 5/26/07 5:32 PM:
I have provisioned a bunch of Polycom 301 phones to get the config files
from my ftp server. Out of the 4 phones 2 get the config file however
the other 2 cannot contact the boot server. I have reboot the phones a
number of times remotely (the client is 400 km
Than you Joss, the links was very usefull.
On 5/27/07, Yossi Ben Hagai [EMAIL PROTECTED] wrote:
Asterisk realtime is what you are looking for. the subject is explained
very clearly including configuration examples and DB schema on the following
links:
hello,
I have installed asterisk 1.2.18 in suse 10.2. After typing asterisk in the
terminal command line (i don't think that asterisk runs when doing this) i
type asterisk -r but the response is Unable to connect to remote
asterisk (does /var/run/asterisk.ctl exist?).
how to solve this.
Why would you want to do this?
If you wanted to run multiple systems together on an Asterisk server I
would run the Asterisk server on Dom0 and the other stuff on DomU systems.
-Jonathan
James Harper wrote:
I did it back in the xen 2.x days with a BRI adapter (Traverse NetJet).
It worked
I just came across www.Zonbu.com http://www.zonbu.com/ it's a fanless
box about the size of a paperback book. It has no hard drive but runs
it's Linux OS on a flash card - relying on document storage from an
online service (rebadged Amazon S3).
I don't think you need to modify th Makefile at all. That might be why
you are having trouble finding details on that.
-Jonathan
Jonson Player wrote:
Hello,
I just want to put all my sip accounts in mysql and asterisk use it
from mysql. How can I do that, could you be more specific because I
It's definitely ftp. I have given the phone a static ip. When I set it to
dhcp it just hangs and cannot get an IP. I can ping the phone and see the web
config page so it is on the network. Any more suggestions.
Steve
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
On Sun, May 27, 2007 at 05:43:59PM +0200, MOSBAH ABDELKADER wrote:
hello,
I have installed asterisk 1.2.18 in suse 10.2. After typing asterisk in the
terminal command line (i don't think that asterisk runs when doing this) i
type asterisk -r but the response is Unable to connect to remote
Can anyone help me to make h323friends peer realtime ?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
asterisk (does /var/run/asterisk.ctl exist?).
This connects to an already running asterisk system.
You first have to start asterisk, type this: asterisk -vc
Or I put the script in /etc/init.d and tell the system to start it on
boot. Then you can do asterisk -r
On Sun, May 27, 2007 at 11:52:32AM -0400, Dean Collins wrote:
I just came across www.Zonbu.com http://www.zonbu.com/ it's a fanless
box about the size of a paperback book. It has no hard drive but runs
it's Linux OS on a flash card - relying on document storage from an
online service
I was cleaning through some old IT magazines this long weekend when I
came across a company called Divitas in the April 30th edition of
Network Computing.
I've never heard of them but has anyone else heard of them?
Basically they have a call control appliance that can deliver centrally
There will be a number of companies set to offer similar services.
In 3 months we will have a 24 port SIP-GSM-SKYPE gateway
-E
On 5/27/07, Dean Collins [EMAIL PROTECTED] wrote:
I was cleaning through some old IT magazines this long weekend when I
came across a company called Divitas in the
I have never tried it but I would assume that you can copy the way asterisk
works with IAX and SIP. Create your own table in mysql and try editing
extconfig.conf and see what happens.
- Original Message -
From: ~Russell
To: asterisk-users@lists.digium.com
Sent: Sunday, May 27,
It seem's to be exiting after it is set. Try NoOp'ing after you set it.
- Original Message -
From: Jerry Geis [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Friday, April 27, 2007 10:36 PM
Subject: [asterisk-users] execute commands after hangup
I have a few commands I
Thanks a lot. Worked like a charm.
- Original Message -
From: Alvin Austin [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Sunday, May 06, 2007 6:00 PM
Subject: Re: [asterisk-users] Polycom 601 - To not make noise
I am testing this phone as well. It does have some NAT issues but besides for
that it works great. What I like about the phone is that you can use both WIFI
and GSM at the same time. This I have not seen on many other phones. Most of
them allow you to use the GSM or WIFI at once but not both
Have you tried using another phone and compare the results ?
- Original Message -
From: Chris Mason (Lists) [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 16, 2007 2:34 PM
Subject: [asterisk-users] Sip
I don't know about bandwith consumption but look at sipp
(http://sipp.sourceforge.net/)
- Original Message -
From: khawla khawla
To: asterisk-users@lists.digium.com
Sent: Saturday, May 26, 2007 10:33 PM
Subject: [asterisk-users] test tools of Asterisk server
I am using
Hi,
I have installed asterisk-1.4.4 and asterisk-addon-1.4.1.
I followed every step to configure RealTime but something is not working
properly; the warning that I am geting is:
WARNING[32709]: config.c:1229 find_engine: Realtime mapping for 'sippeers'
found to engine 'mysql', but the
Is there a way to remote reboot a Cisco 7940 or 7960 phone via some kind of
command? The idea is to force a reboot automatically after changing one of
the configuration files.
Regards,
Paul
___
--Bandwidth and Colocation provided by Easynews.com --
Looks like a rebadged Patton 6075 to me:
http://www.patton.com/products/pe_products.asp?category=337
Nabeel
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Dean Collins
Sent: May 27, 2007 11:53 AM
To: Asterisk Users Mailing List -
On May 27, 2007, at 5:29 PM, Paul Aviles wrote:
Is there a way to remote reboot a Cisco 7940 or 7960 phone via some
kind of command? The idea is to force a reboot automatically after
changing one of the configuration files.
As long as you have telnet access turned on in the config file,
Looks very close but the next generation on from the Patton (eg cf card,
extra usbs and faster cpu) - though with Chinese manufacturing turning
out new models on the same form factor could be totally different.
Regards,
Dean
-Original Message-
From: [EMAIL PROTECTED]
I know that part, I am looking for a way to do it directly from asterisk.
Lets say you change a value in the XML configuration of one unit, then from
the asterisk box send the signal and reboot only the affected unit. I guess
we can always script the telnet process and reboot like that if nothing
$99,00 for one box, but you need a subscription plan...
Zonbu is $99 with a two-year subscription plan. With month to month plan,
Zonbu is $249.
Sds,
Gustavo
From: Nabeel Jafferali [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED],Asterisk Users Mailing List - Non-Commercial
I've to setup Asterisk on a Dell PowerEdge 1750 server. Its dual Xeon 3GHz
with Hyperthreading. People on this list who have experience with this
server please advise me how is the performance of Asterisk on this server,
what flavour of linux is good on it etc. Is Hyperthreading going to be a
1. RE: Start recording automatically when xferring to
anextension? (Don Pobanz)
Message: 1
Date: Fri, 25 May 2007 11:54:33 -0500
From: Don Pobanz [EMAIL PROTECTED]
Subject: RE: [asterisk-users] Start recording automatically when
xferring to anextension?
To: Asterisk Users
Got any rogue DHCP options configured that are set for that MAC address
or range? I've noticed when you put in options that the Polycom looks
for and have them configured syntactically incorrect, the Polycoms will
refuse the entire transaction instead of just the option that was
screwed up
34 matches
Mail list logo
