hi,
Although I changed those parameters. Asterisk does not detect hangup
signal
signalling = fxs_ks
busydetect = yes
busycount = 3
busypattern = 500,500
answeronpolarityswitch = no
hanguponpolarityswitch = yes
callprogress=no
progzone=in
usecallerid=yes
cidstart=ring
callerid=asreceived
group=0
On Fri, Jul 30, 2010 at 07:15:00AM -0400, Fred Posner wrote:
On Jul 30, 2010, at 5:04 AM, Andraž wrote:
Ok, problem is another, when I run configure, it write this:
checking for tds_version in -ltds... no
configure: ***
configure: *** The FreeTDS installation on this system appears to
Hi ,
Thanks danny nicholas. Finally we get the things done with following.
If i specify busypatten=500,500 then asterisk does not recognize hang up
signal. After removing it only all are working fine.
I choosed 2nd option as per your suggestions.
working chan-dahdi.conf:
Hi ,
Thanks danny nicholas. Finally we get the things done with following.
If i specify busypatten=500,500 then asterisk does not recognize hang up
signal. After removing it only all are working fine.
I choosed 2nd option as per your suggestions.
working chan-dahdi.conf:
Hi Group,
actual i have a transcode problem and i have no idea to solve this. All my wav
files are alaw encoded and i allow only alaw codec.
But sometimes the WriteFormat is slin and if i recall the same number the
WriteFormat is alaw for the Channel.
Why the channel has sometimes slin and
Now that I check again, I see that DNSMasq for DHCP and DNSMasq for DNS is
NOT enabled. Which one should I enable and also can you please detail what
DNSMasq really does?
With my situation, only some of the phones go off randomly. But it is a few
specific extensions I think. Not the server
On 7/30/2010 11:37 AM, unsero...@aol.com wrote:
Hi all,
I have two questions regarding DUNDi and Asterisk Realtime. I have
successfully set up DUNDi on my two Asterisk boxes, which means
dundi show peers on each box shows the other box as known and dialplan
show dundiextens shows the
On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
QueueMetrics is actually free (as in beer) for very small call centers and
individual hackers.
Oh really! I didn't know that! Very nice.
What is considered a small call centre? Are we talking up to around 5
agents or something? Is there a limit on
On 7/30/2010 2:00 PM, Philipp von Klitzing wrote:
Hi there!
David has put up a patch to fix the STUN issues that has plagued Asterisk
1.6 ever since that feature was introduced. Now we need testers to verify
the patch, so please grab the patch (or check out the SVN branch) and add
your
On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
Hi. I am using *1 in features to initiate a mix monitor recording.
However, when I hit *1, the callee hears the courtesy tone which I have,
so I know when the recording is started or stopped. This is a problem,
particularly in automated
On 31/07/10 16:06, bruce bruce wrote:
Now that I check again, I see that DNSMasq for DHCP and DNSMasq for DNS
is NOT enabled. Which one should I enable and also can you please detail
what DNSMasq really does?
Look at
http://www.dd-wrt.com/wiki/index.php/DNSMasq_as_DHCP_server
DC
--
Hi all,
I have two questions regarding DUNDi and Asterisk Realtime. I have
successfully set up DUNDi on my two Asterisk boxes, which means
dundi show peers on each box shows the other box as known and dialplan
show
dundiextens shows the extensions on each box configured in sip.conf.
On 31 July 2010 15:28, Leif Madsen leif.mad...@asteriskdocs.org wrote:
On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
QueueMetrics is actually free (as in beer) for very small call centers and
individual hackers.
Oh really! I didn't know that! Very nice.
What is considered a small call centre?
Hi List,
It would be great if someone can share the TE220 card dahdi
configuration file.
Im using an E1 line. I know most of users find it difficult to get the
correct config file.
Im putting my efforts and will surely share my config file once it gets
working.
Thanks Regards,
Rushikesh
On Sat, Jul 31, 2010 at 09:13:46PM +0530, Rushikesh wrote:
Hi List,
It would be great if someone can share the TE220 card dahdi
configuration file.
Im using an E1 line. I know most of users find it difficult to get the
correct config file.
A. Please don't reply to an existing message
Leif Madsen leif.mad...@asteriskdocs.org wrote:
On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
Hi. I am using *1 in features to initiate a mix monitor recording.
However, when I hit *1, the callee hears the courtesy tone which I have,
so I know when the recording is started or
2 users. So, it's probably never used as a free version as probably there
are no 2 seat call centers that can survive this economy. But, it should
great for testing.
On Sat, Jul 31, 2010 at 10:28 AM, Leif Madsen
leif.mad...@asteriskdocs.orgwrote:
On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
On 7/31/2010 11:56 AM, cov...@ccs.covici.com wrote:
Leif Madsenleif.mad...@asteriskdocs.org wrote:
On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
Hi. I am using *1 in features to initiate a mix monitor recording.
However, when I hit *1, the callee hears the courtesy tone which I have,
Leif Madsen leif.mad...@asteriskdocs.org wrote:
On 7/31/2010 11:56 AM, cov...@ccs.covici.com wrote:
Leif Madsenleif.mad...@asteriskdocs.org wrote:
On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
Hi. I am using *1 in features to initiate a mix monitor recording.
However, when I hit
19 matches
Mail list logo