We solved our former echo issues... however, as luck would have it..
Faxing is yet a completely different animal. We understand that digium
doesn't really support faxing with asterisk... HOWEVER...it seems that ATA
manufacturers and the MAX TNT indicate that fax is supported
Tilghman, you are spot on!
As it turns out, this parameter is not documented at all in
http://www.voip-info.org/wiki/index.php?page=Asterisk+config+voicemail.c
onf or anywhere on Internet.
Also, in that voicemail wiki, there seems to be a lot of parameters
that
wasn't explained at all.
I
Dears;
I do not know if any had experience in using speex or
ilbc with IAX and got good results, because I am
facing a problem with GSM.
I am facing a noise problem when I am using GSM with
IAX trunk as following:
IP Phone (G711) --- Local Asterisk Box --- IAX Trunk
using GSM codec --- Remote
On Wed, May 21, 2008 at 7:28 AM, bilal ghayyad [EMAIL PROTECTED] wrote:
Dears;
I do not know if any had experience in using speex or
ilbc with IAX and got good results, because I am
facing a problem with GSM.
I am facing a noise problem when I am using GSM with
IAX trunk as following:
IP
On Wed, May 21, 2008 at 8:11 AM, Steve Totaro
[EMAIL PROTECTED] wrote:
On Wed, May 21, 2008 at 7:28 AM, bilal ghayyad [EMAIL PROTECTED] wrote:
Dears;
I do not know if any had experience in using speex or
ilbc with IAX and got good results, because I am
facing a problem with GSM.
I am
Hi,
I'm running several asterisk servers in combination with dundi. The
servers are in different data centers, but other than that they are running
identical copies of the same os image, asterisk configuration, etc. One
server acts as the trunk and is used to terminate pstn calls, and pass
Hello all,
its been a while im trying to setup my asterisk/sipura 3102 to recieve/make
calls from softphones on pcs in my home..
i've set up 5 SIP extensions in sip.conf and made the dialing plan in
extensions.conf..
i could make calls from 1 sip phone to another in my home.. but i cant call
Matt,
Thanks for the input. I have done this. The issue is that the
onboard network controllers share IRQ with the PCI slots. Although I
have had 0 issues until now, because I moved everything so 1 PCI slot
was independent, the box cannot support a second card and everything
else. I
Hi John, congratulations!... and to Digium for hiriing such talented people.
I'd like to take a few moments to introduce myself and the new role
in which I'll be working for Digium to further the Asterisk project
and environment. As you may know, Digium plays a key part in
assisting with the
Does your extensions.conf have any more configuration than what you've shown?
If not, then you are lacking dialplan for anything but internal calls.
--
Matt
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RoLaNd RoLaNd
Sent: Wednesday, May 21, 2008 9:01 AM
To:
Hi Roland
I have 2 linksys spa-3102 working pretty good both dialing in and out
and I followed this instructions to set it up:
update to the latest firmware then:
..Go to the first tab ‘Voice’ and sixth sub-tab ‘Line 1’
SIP Settings:
..SIP Port: Notice that it is set to 5060 for
We are using Asterisk 1.4.13 on FC6 and have a T1 card with 20 DID's.
We are wanting to use one of the DID's for Fax, is this possible or do we have
to add some addition Hardware and what is the best way to do this.
I know that similar thing would have been asked multiple time already, but I
Eric Wieling wrote:
Doug Lytle wrote:
Eric Wieling wrote:
Remove the qualify= option from sip.conf. Also make sure the DISABLE
CDP in the Polycom's boot menu.
That didn't help and CDP is off by default, the phones still couldn't
receive/send calls when in this state.
I will be out of the office starting 05/19/2008 and will not return until
05/22/2008.
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
Sanjay Rajdev wrote:
We are using Asterisk 1.4.13 on FC6 and have a T1 card with 20 DID's.
We are wanting to use one of the DID's for Fax, is this possible or do
we have to add some addition Hardware and what is the best way to do this.
http://iaxmodem.sourceforge.net
Thanks,
Lee.
On Wed, May 21, 2008 at 3:12 PM, Nicolás Gudiño [EMAIL PROTECTED] wrote:
Hi John, congratulations!... and to Digium for hiriing such talented people.
Hear, hear! raises second glass
___
-- Bandwidth and Colocation Provided by
On Wed, May 21, 2008 at 10:26 AM, Lee Howard [EMAIL PROTECTED] wrote:
Sanjay Rajdev wrote:
We are using Asterisk 1.4.13 on FC6 and have a T1 card with 20 DID's.
We are wanting to use one of the DID's for Fax, is this possible or do
we have to add some addition Hardware and what is the best way
We solved our former echo issues... however, as luck would have it..
Faxing is yet a completely different animal. We understand that digium
doesn't really support faxing with asterisk... HOWEVER...it seems that
ATA manufacturers and the MAX TNT indicate that fax is supported
How about outbound faxing.
Regards,
Sanjay Rajdev
- Original Message -
From: Steve Totaro [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 21, 2008 8:04:46 PM GMT +05:30 Chennai, Kolkata, Mumbai,
Hi,
I am looking for a very low cost way of receiving and sending T38 fax
reliably. Is there any possible solution using Asterisk as the PSTN SIP
gateay and Digium E1/T1 card? Is there other open source package that can
help to accomplish this purpose?
Regards,
Mark
On Wed, May 21, 2008 at 10:40 AM, Sanjay Rajdev
[EMAIL PROTECTED] wrote:
How about outbound faxing.
Regards,
Sanjay Rajdev
How about it? Describe your needs. There are different ways of doing
the same thing, it all depends on needs.
Thanks,
Steve Totaro
Anthony Francis wrote:
Did you ever try turning off all phones, flushing the lease table and
bringing the phones back up?
Yes,
It made no difference.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither
We would like to do something similar to efax, where we can send mail to send
fax or something similar. I tried to install Asterisk Fax
http://asterfax.sourceforge.net/ but was not able to compile it with Asterisk
1.4.19.2, I have read that they recommend Asterisk 1.2.X and older version of
On May 21, 2008, at 9:55 AM, Sanjay Rajdev wrote:
We are using Asterisk 1.4.13 on FC6 and have a T1 card with 20 DID's.
We are wanting to use one of the DID's for Fax, is this possible or
do we have to add some addition Hardware and what is the best way to
do this.
I know that similar
On Wed, May 21, 2008 at 10:48 AM, Niles Ingalls [EMAIL PROTECTED] wrote:
On May 21, 2008, at 9:55 AM, Sanjay Rajdev wrote:
We are using Asterisk 1.4.13 on FC6 and have a T1 card with 20 DID's.
We are wanting to use one of the DID's for Fax, is this possible or do we
have to add some addition
Further more I think we will have to license it to for using it on more than
one channel. I am looking for something totally open source.
Regards,
Sanjay Rajdev
- Original Message -
From: Sanjay Rajdev [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Dear,
after a lot of searching and testing I can not find a
total solution for nat, with ser -- asterisk.
now I have 3 selections:
1)using iax-phones instead of sip phones with asterisk
2)using sip phones registered in asterisk,
3)using sip phones with ser/openser and, searching for
new ways,
-- An HTML attachment was scrubbed... URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080521/7c9ef721/attachment.htm
--
___ --Bandwidth and Colocation
Provided by http://www.api-digital.com
On Wed, May 21, 2008 at 10:51 AM, Sanjay Rajdev
[EMAIL PROTECTED] wrote:
We would like to do something similar to efax, where we can send mail to
send fax or something similar. I tried to install Asterisk Fax
http://asterfax.sourceforge.net/ but was not able to compile it with
Asterisk
yes thats the only thing i have in extensions.conf
should there be anything else?!
Message: 21Date: Wed, 21 May 2008 09:40:26 -0400From: Matt Watson [EMAIL
PROTECTED]Subject: Re: [asterisk-users] asterisk and sipura 3102 (pstn to
sip/sip to pstn calls)To: Asterisk Users Mailing List -
On Wed, May 21, 2008 at 10:54 AM, Pezhman Lali [EMAIL PROTECTED] wrote:
Dear,
after a lot of searching and testing I can not find a
total solution for nat, with ser -- asterisk.
now I have 3 selections:
1)using iax-phones instead of sip phones with asterisk
2)using sip phones registered in
Pezhman Lali wrote:
Dear,
after a lot of searching and testing I can not find a
total solution for nat, with ser -- asterisk.
now I have 3 selections:
1)using iax-phones instead of sip phones with asterisk
2)using sip phones registered in asterisk,
3)using sip phones with ser/openser and,
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm not
getting any CRC, framing or other errors on the T1.
Go on ebay and buy an
On Tue, May 20, 2008 at 05:42:15PM -0300, Vin?cius Fontes wrote:
You could simply short-circuit the two wires of the line. The telco
will interpret that as a busy line.
Please
600 ohm, 1 watt wirewound resistor. If it's on a short loop, you might
have to go as high as 5 watts. POTS lines
On Wed, May 21, 2008 at 11:02 AM, Sherwood McGowan
[EMAIL PROTECTED] wrote:
Pezhman Lali wrote:
Dear,
after a lot of searching and testing I can not find a
total solution for nat, with ser -- asterisk.
now I have 3 selections:
1)using iax-phones instead of sip phones with asterisk
2)using
What TAOS do you have?
On May 21, 2008, at 10:39 AM, JR Richardson wrote:
We solved our former echo issues... however, as luck would have
it..Faxing is yet a completely different animal. We
understand that digium doesn't really support faxing with
asterisk... HOWEVER...it
2008/5/21 The Asterisk Development Team [EMAIL PROTECTED]:
The Asterisk.org development team has released Asterisk version 1.4.20.
[snip]
Does this mean that the fixed IAX security fix for 1.2.28 (1.2.28.1?)
will also be officially released now?
If it helps, I have given 1.2 trunk some light
On Tue, May 20, 2008 at 6:05 PM, Carlos Chavez [EMAIL PROTECTED] wrote:
Thank you. Unfortunately the phone Company in Mexico is not very
helpful when it comes to those services.
On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
On Tuesday 20 May 2008 16:08:19 Carlos Chavez
have you tested hylafax with iaxmodem ?
2008/5/21 Shane Burrell [EMAIL PROTECTED]:
What TAOS do you have?
On May 21, 2008, at 10:39 AM, JR Richardson wrote:
We solved our former echo issues... however, as luck would have
it..Faxing is yet a completely different animal. We
Steve Totaro wrote:
You may need an additional
server just to handle faxes if you are running many instances as they
are CPU intensive.
iaxmodem is not CPU intensive. 100 of them aren't. You can put that
many on a typical modern machine and have them all faxing simultaneously
and not see a
On Wed, May 21, 2008 at 11:56 AM, Lee Howard [EMAIL PROTECTED] wrote:
Steve Totaro wrote:
You may need an additional
server just to handle faxes if you are running many instances as they
are CPU intensive.
iaxmodem is not CPU intensive. 100 of them aren't. You can put that
many on a
Hello,
In Asterisk you can type zap show status to at least show you some
basic error information:
CLI zap show status
Description Alarms IRQbpviol CRC4
wanpipe1 card 0 OK 0 0 0
wanpipe2 card 1
I was seeing your print screen images, and the observation is.
You are not doing any sip registration on the server since your Register
option in the Tab PSTN Line is set to NO.
you should change it to yes. (or add in the sip.conf the host=SPA_ip instead
of dynamic).
regards.
--
Jose Flores
On Wed, May 21, 2008 at 12:00 PM, Steve Totaro
[EMAIL PROTECTED] wrote:
On Wed, May 21, 2008 at 11:56 AM, Lee Howard [EMAIL PROTECTED] wrote:
Steve Totaro wrote:
You may need an additional
server just to handle faxes if you are running many instances as they
are CPU intensive.
iaxmodem is
Hi,
Does anyone know how to change the language for the user interface in a
Polycom SoundPoint IP 300?
Thanks
--
Jose Flores Galicia
[EMAIL PROTECTED]
BriefCode Code Based Training
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com
Hi All,
With AsteriskNow, it's supposed to run a setup wizard the first time
you connect to https://asteriskbox.mydomain.com. But in my case, it's
not. Is there a url to force it to run the wizard?
-Scott
___
-- Bandwidth and Colocation Provided by
Hi Jose,
i just did that, doesnt seem to work..
its still giving me the same error
Date: Wed, 21 May 2008 11:02:36 -0500
From: [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] asterisk and sipura 3102 (pstn to sip/sip to
pstn calls)
I was seeing your
/attachments/20080521/7c9ef721/attachment.htm
--
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman
Joe Pukepail wrote:
Is there a way to see error counts on the T1 of a PRI?
Hooked up to asterisk via a digium TE122. Looking for
something to make sure I'm not getting any CRC, framing or
other errors on the T1.
Many moons ago I use to used a program called zttool. It
Don Pobanz wrote:
Joe Pukepail wrote:
Is there a way to see error counts on the T1 of a PRI?
Hooked up to asterisk via a digium TE122. Looking for
something to make sure I'm not getting any CRC, framing or
other errors on the T1.
Many moons ago I use to used a
Hi All,
I'm poking around with 1.6, tried to compile the addon package, but it
doesn't see mysql_config installed.
I have mysql-client, mysql-common and mysql-server installed. I'm
running debian etch.
Any suggestions?
Thanks.
JR
--
JR Richardson
Engineering for the Masses
Don't know about Debian but in Fedora or CentOS you need to install
mysql-devel to compile Mysql support in Asterisk-Addons
On Wed, 2008-05-21 at 14:31 -0500, JR Richardson wrote:
Hi All,
I'm poking around with 1.6, tried to compile the addon package, but it
doesn't see mysql_config
I don't know in debian, but in ubuntu is libmysqlclient15-dev
Try apt-get install libmysqlclient[TAB] for autocomplete
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Carlos Chavez
Enviado el: Miércoles, 21 de Mayo de 2008 02:39 p.m.
Para: Asterisk Users
JR Richardson wrote:
I have mysql-client, mysql-common and mysql-server installed. I'm
running debian etch.
If it's like 1.4.x, you'll need mysql-devel
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither
You need the dev package. In this situation, try :
apt-get install apt-file
apt-file update
apt-file search mysql_config
you'll see that you need to install libmysqlclient15-dev as if you'd
have used
Hello! I am working on a CRM web application developed on ASP and I need to
integrate a webphone to make/receive/transfer/pause calls for each agent
logued through the CRM interface. Is there a solution that I could use out
there?. On the other hand, I need that a web browser pops up an url with
Jay R. Ashworth wrote:
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm not
getting any CRC, framing or other errors on the T1.
On Wed, 2008-05-21 at 18:06 -0300, Gustavo A Gonzalez wrote:
Hello! I am working on a CRM web application developed on ASP and I
need to integrate a webphone to make/receive/transfer/pause calls for
each agent logued through the CRM interface. Is there a solution that
I could use out there?.
Gustavo A Gonzalez wrote:
Hello! I am working on a CRM web application developed on ASP and I need
to integrate a webphone to make/receive/transfer/pause calls for each
agent logued through the CRM interface. Is there a solution that I could
use out there?. On the other hand, I need that a
Lyle Giese wrote:
Jay R. Ashworth wrote:
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm
not
getting any CRC, framing or other
I'm poking around with 1.6, tried to compile the addon package, but it
doesn't see mysql_config installed.
I have mysql-client, mysql-common and mysql-server installed. I'm
running debian etch.
Any suggestions?
I reverted to debian sarge and the addon package did find mysql
installed. So
General Asterisk question.
We are sending CDR's to MySQL via odbc. It seems that Asterisk is sometimes
dropping CDR's, and they aren't being sent to the database (they ARE in the
Master.csv file though). We suspect that when the MySQL socket is idle, it gets
disconnected, either by the MySQL
I have been doing some reading about gtalk and asterisk. Most of it is
pointed to enable using gtalk for making phonecalls. Would it be
possible to use gtalk instant messaging input (just some text send to
the gtalk account configured on an asterisk box) into the dialplan.
This way you
Douglas Garstang wrote:
We are sending CDR's to MySQL via odbc. It seems that Asterisk is
sometimes dropping CDR's, and they aren't being sent to the database
(they ARE in the Master.csv file though). We suspect that when the MySQL
socket is idle, it gets disconnected, either by the MySQL
I had a similar problem, but in my case we had a custom application that was
throwing an segmentation exception which was causing Asterisk to Restart. And
in that case It use to miss the log in database.
You can determine the same by looking at the UNIQUEID being logged for the
call. The
Steve Davies wrote:
Does this mean that the fixed IAX security fix for 1.2.28 (1.2.28.1?)
will also be officially released now?
If it helps, I have given 1.2 trunk some light testing and it seems
reasonably sane.
Thanks for the reminder. I will build that release right now.
--
Russell
On Wed, May 21, 2008 at 5:06 PM, Gustavo A Gonzalez
[EMAIL PROTECTED] wrote:
Hello! I am working on a CRM web application developed on ASP and I need to
integrate a webphone to make/receive/transfer/pause calls for each agent
logued through the CRM interface. Is there a solution that I could
Sanjay Rajdev wrote:
I had a similar problem, but in my case we had a custom application that
was throwing an segmentation exception which was causing Asterisk to
Restart. And in that case It use to miss the log in database.
You can determine the same by looking at the UNIQUEID being logged
I couldn't find one for cdr_mysql.conf.
We're using odbc anyway. MySQL directly might be an option if it works.
Don't think we want to modify the server.
- Original Message
From: Alex Balashov [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Douglas Garstang wrote:
I couldn't find one for cdr_mysql.conf.
We're using odbc anyway. MySQL directly might be an option if it works.
Don't think we want to modify the server.
Perhaps there's a keepalive option to be set on the UnixODBC DSN, then?
--
Alex Balashov
Evariste Systems
Web
Hi Erik,
There's ongoing work on the topic, you might be want to have a look at
BJ Weschke's note and branch : http://www.asterisk.org/node/48440 .
The final purpose of this code is to allow users to send/receive AMI
commands over an XMPP connection to Asterisk. Placing an Originate
action in
On Wed, May 21, 2008 at 5:37 PM, Douglas Garstang [EMAIL PROTECTED] wrote:
General Asterisk question.
We are sending CDR's to MySQL via odbc. It seems that Asterisk is sometimes
dropping CDR's, and they aren't being sent to the database (they ARE in the
Master.csv file though). We suspect
- Original Message
From: Alex Balashov [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 21, 2008 3:30:06 PM
Subject: Re: [asterisk-users] Asterisk Database Handling
Douglas Garstang wrote:
I couldn't
So... surely this must be a general problem with ANY Asterisk module that
uses the database. Do all modules use the same common database code or do
they all use their own? If they all use their own, I guess idle database
connection issues may be fixed in some modules and not others. If it's
Douglas Garstang wrote:
I couldn't find one for cdr_mysql.conf.
We're using odbc anyway. MySQL directly might be an option if it works.
Don't think we want to modify the server.
- Original Message
From: Alex Balashov [EMAIL PROTECTED]
To: Asterisk Users Mailing List -
On Wed, May 21, 2008 at 6:42 PM, Douglas Garstang [EMAIL PROTECTED] wrote:
So... surely this must be a general problem with ANY Asterisk module that
uses the database. Do all modules use the same common database code or do
they all use their own? If they all use their own, I guess idle
Sherwood McGowan wrote:
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if you're considering using the cdr_mysql addon,
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if you're considering using the cdr_mysql addon, I would highly
suggest it
On Wed, May 21, 2008 at 7:00 PM, Douglas Garstang [EMAIL PROTECTED] wrote:
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if
Douglas Garstang wrote:
It's interesting you say that Sherwood. Does your MySQL server have some
sort of keep alive setting? I suspect this is a general problem that
would affect any and all Asterisk database connectivity.
I would actually expect it to affect only specific types of database
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if you're considering using the cdr_mysql addon, I would highly
suggest it
Not at all, just offering a workaround. If your master.csv is
complete and correct then it makes sense to use that data unless
someone can identify your problem and offer a fix.
Unfortunately, not really feesible. I didn't design the system but we are using
CDR's not only for billing purposes,
On Wed, May 21, 2008 at 7:11 PM, Douglas Garstang [EMAIL PROTECTED] wrote:
Not at all, just offering a workaround. If your master.csv is
complete and correct then it makes sense to use that data unless
someone can identify your problem and offer a fix.
Unfortunately, not really feesible. I
Douglas Garstang wrote:
Not at all, just offering a workaround. If your master.csv is
complete and correct then it makes sense to use that data unless
someone can identify your problem and offer a fix.
Unfortunately, not really feesible. I didn't design the system but we
are using
Douglas Garstang wrote:
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if you're considering using the cdr_mysql addon, I
Douglas Garstang wrote:
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
that if you're considering using the cdr_mysql addon, I
On Wednesday 21 May 2008 17:02:07 Alex Balashov wrote:
Douglas Garstang wrote:
We are sending CDR's to MySQL via odbc. It seems that Asterisk is
sometimes dropping CDR's, and they aren't being sent to the database
(they ARE in the Master.csv file though). We suspect that when the MySQL
On Wednesday 21 May 2008 17:52:45 Alex Balashov wrote:
Sherwood McGowan wrote:
I personally can tell you I've never had a problem with either the
PostgreSQL or MySQL cdr apps themselves losing records. However, I can't
say personally how well the ODBC method works. I'll just stick to saying
Hi,
How do I make 3way calling in Asterisk? Please help me.
Thank you.
--
Richard R. Cahilig
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
Looks like an Asterisk 1.4 option?
- Original Message
From: Tilghman Lesher [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 21, 2008 4:39:24 PM
Subject: Re: [asterisk-users] Asterisk Database Handling
On Wednesday 21 May 2008 19:03:25 Douglas Garstang wrote:
On Wednesday, May 21, 2008 4:39:24 PM, Tilghman Lesher wrote:
On Wednesday 21 May 2008 17:02:07 Alex Balashov wrote:
Douglas Garstang wrote:
We are sending CDR's to MySQL via odbc. It seems that Asterisk is
sometimes dropping
12.0.2
I am speculating, and i'm not sure what i'm basing the speculation on, but I
believe the problem is with timing between the TNT and the ATA.
From: Shane Burrell [EMAIL PROTECTED]
Sent: Wednesday, May 21, 2008 10:17 AM
To: Asterisk Users Mailing
Tilghman Lesher wrote:
Correct; it's actually a workaround for a bug in the MySQL drivers. It was
discovered long after 1.2 was end-of-lifed.
I got bit by MySQL reconnects on some other software I wrote I think when I
jumped from MySQL 4.* to 5.*. If memory serves, here is the relevant
There seems to be a 2 second delay after issueing the command
/usr/sbin/asterisk -rx sip show peers
in 1.4.20
Is there a reason why the delay? It wasnt there before.
Matter of fact I just jumped into an old system and no delay. 1.4.20 has
the delay.
Jerry
Hello,
I am trying to place call through the Manager, using the Zap Card the call
connect to the designated Extension before the call is actually Answered by
someone or the Voicemail.
The message that I am sending is
Action: Originate
Channel: ZAP/G0/1XX
MaxRetries: 0
Context:
At 9:55 PM on 20 May 2008, Vinz486 wrote:
2008/5/17 bilal ghayyad [EMAIL PROTECTED]:
So no way to discover the status of FXO if a cable
^^^
Foxtrot X-ray *Oscar*
pluged or not?
Did you read my previou msg
Hookstate
mark morreny wrote:
Hi,
I am looking for a very low cost way of receiving and sending T38 fax
reliably. Is there any possible solution using Asterisk as the PSTN
SIP gateay and Digium E1/T1 card? Is there other open source package
that can help to accomplish this purpose?
Asterisk is
On Wednesday 21 May 2008 19:36:11 Steve Prior wrote:
Tilghman Lesher wrote:
Correct; it's actually a workaround for a bug in the MySQL drivers. It
was discovered long after 1.2 was end-of-lifed.
I got bit by MySQL reconnects on some other software I wrote I think when I
jumped from MySQL
Steve Prior wrote:
Tilghman Lesher wrote:
Correct; it's actually a workaround for a bug in the MySQL drivers. It was
discovered long after 1.2 was end-of-lifed.
I got bit by MySQL reconnects on some other software I wrote I think when I
jumped from MySQL 4.* to 5.*. If memory
At 18:55 5/21/2008, Richard Cahilig wrote:
Hi,
How do I make 3way calling in Asterisk? Please help me.
Thank you.
1. Press the flash key
2. Listen for dialtone, then key in extension
3. Press the # pound button.
4. Either wait for the third party to answer, or
5. Press the flash key
--
1 - 100 of 101 matches
Mail list logo