Dear
in normal mode, .call files make a call between the system and who you named
remote person, I don't know where are you?
in natmode=yes, set qualify=yes.
check the negotiated codecs also.
Best
On Sat, Aug 13, 2011 at 1:29 AM, Carlos Chavez cur...@telecomabmex.comwrote:
We are having
On Thu, 11 Aug 2011, Adam Moffett wrote:
Hello list,
I presently use the 1.4 releases because I enjoy sleeping
at night. I understand that 1.4 reaches end-of-life in a little over 8
months (https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions). I
also know (as
Hi All;
The main number is 56725000 and we have DIDs from 5000 to 5999. Now, I need
that if five IP Phones make outside calls, then destination should see only
56725111 so I beleive it is related to the DID 5111 but I do not know what I
have to do a settings for this DID and where, so I can
Hi All;
To overcome the echo problem, what mainly I have to do in the configuration
other than the following line in the system.conf under dahdi directory?
echocanceller=mg2,1-16
1) How can I know if the digium card supporting echo cancellator?
2) If I am getting a message in the consol that
On Sat, 13 Aug 2011, bilal ghayyad wrote:
I need that if five IP Phones make outside calls, then destination
should see only 56725111...
You can set the caller ID before you dial.
Whether it 'works' depends on your provider.
Some providers will let you set the caller ID to anything, some
hi folks,
can some one please explain to me what this one stands for :
Exten = 1234,1,read(numtodial,enternum,10,skip,1,10)
that numtodial and enternum
--
*
HARAZ Tahar
*
*Engineering Student at the National Institute for Posts and
Telecommunications (INPT)
*
*
Phone: +212 6 78030050
On Sat, 13 Aug 2011, bilal ghayyad wrote:
To overcome the echo problem...
Digium sells 'High Performance Echo Cancellation'
http://www.digium.com/en/products/software/hpec.php
Also, the 'Oslec Echo Canceller'
http://www.rowetel.com/blog/?page_id=454
is supposed to be
On Sun, 14 Aug 2011, Tahar .H wrote:
can some one please explain to me what this one stands for :
Exten = 1234,1,read(numtodial,enternum,10,skip,1,10)
[core] show application read
--
Thanks in advance,
-
Steve Edwards