Hi,
Am Montag, den 04.02.2013, 14:45 +0100 schrieb Jonas Kellens:
Hello,
thanks you for your answer.
The IP-phones in this case are Yealink T32G.
What setting is needed in this IP-phone ?
as Kevin already written, set this in asterisk:
sendrpid=pai
trustrpid=yes
I don't
Minimum 3 days to Next Day Air something in.
My real concern is the Analog Extensions getting hit by lightening and
taking out the server, but since the cards are module based hopefully this
will not happen. I may use your hot spare idea.
On Mon, Feb 4, 2013 at 10:14 PM, Carlos Alvarez
My gut tells me to isolate the analog from the real pbx as much as
possible, but in the end it all has to be connected my the lan. I rarely
use FXS devices, so i'm leary of trusting the module to burn and save the
card.
The closest building is 950 ft, the second is 1850 ft. These two buildings
On 5/2/13 11:45 am, Jared Baxley wrote:
The closest building is 950 ft, the second is 1850 ft. These two buildings
are connected via LRE's using existing 6 Pair, Unfortunately re
cabling isn't an option. Other buildings are even further from the office,
about 15 or so scattered about that only
2013/2/1 Don Kelly d...@donkelly.biz
-Original Message-
snip
What I had in mind is to use someone's cellphone as a presence detector.
Let me explain:
- as the first thing you take along when leaving a room or location,
is your own cellphone, why not use chan_mobile and a
Is there any solution, I want to know at first sight from which division
the voicemail came from like for example I need 3 more users to send when
some one calls an inbound route named darin when it reaches darin voicemail
then admin should send from da...@yahoo.com
--
Dear Mr. Colp and/or anyone who can help,
Recently Ive upgraded to Asterisk 11 and setup chan_motif for Google Voice.
Outbound calls are working good but I dont have any inbound traffic through
GV.
I did all I could find on Google but nothing solved. GV settings seems to be
right (Google
At 08:11 PM 2/4/2013, you wrote:
Would you purchase a NEW TOWER Server with PCI slots to accommodate the cards,
OR
Purchase a NEW RACK MOUNT server for the PBX, and Buy/Build a
Cheaper Server just for the analog extensions,
Personally I think I'd purchase a number of used servers so if one
On Mon, Feb 4, 2013 at 11:11 PM, Jared Baxley jared.bax...@gmail.com wrote:
Client - Not for Profit in the Middle of the Jungle/Rain Forrest
Infrastructure - Datacenter is Non Climate Controlled, Prone to Flooding,
and has Sketchy Power, LAN - NEW Cabling in main Office building, Hodge
Podge
Hi,
Could anyone please point me to a comprehensive how-to for H323 support in
Asterisk 11?
I'd like to connect machines that only support H323 and Asterisk 11.
I've read the h323.conf file but I'd like to see more example setups.
Thanks,
Vieri
--
On Tue, Feb 5, 2013 at 11:43 AM, Ira i...@extrasensory.com wrote:
Personally I think I'd purchase a number of used servers so if one dies,
you have a backup or three. 25 lines does not need a modern processor and
it seems silly to spend money for a warranty when you could spend less and
have
Is chan_ooh323 broken in Asterisk 11?
--- On Tue, 2/5/13, Vieri rentor...@yahoo.com wrote:
Hi,
Could anyone please point me to a comprehensive how-to for
H323 support in Asterisk 11?
I'd like to connect machines that only support H323 and
Asterisk 11.
I've read the h323.conf file but I'd
Hi,
I've always used dahdi-genconf to just create the dahdi-channels.conf
and since our PRI is fairly simple (just dump all the channels into one
group) it works with dialing with dahdi/g1/(number). I'm trying to
understand the file though for my own reference.
It seems the file looks like this:
Josue Freitas wrote:
Dear Mr. Colp and/or anyone who can help,
Recently I’ve upgraded to Asterisk 11 and setup chan_motif for Google
Voice. Outbound calls are working good but I don’t have any inbound
traffic through GV.
I did all I could find on Google but nothing solved. GV settings seems
to
Thank you!
What about the XMPP traffic? Even when I place calls using GV there's no
XMPP traffic on 5222.
Do I really need to have the XMPP port (5222) open in the firewall?
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com]
Josue Freitas wrote:
Thank you!
What about the XMPP traffic? Even when I place calls using GV there's no
XMPP traffic on 5222.
Do I really need to have the XMPP port (5222) open in the firewall?
Asterisk acts as an XMPP client. It establishes an outgoing connection
to port 5222 of the
Might also want to check the google hasnt detected an unusual login and is
asking for the ip to be accepted.
Log in to gmail with that account and check
Sent from my iPhone 5
On Feb 5, 2013, at 4:31 PM, Joshua Colp jc...@digium.com wrote:
Josue Freitas wrote:
Thank you!
What about the
I've always used dahdi-genconf to just create the dahdi-channels.conf
and since our PRI is fairly simple (just dump all the channels into
one
group) it works with dialing with dahdi/g1/(number). I'm trying to
understand the file though for my own reference.
It seems the file looks like
What you say...Richard Mudgett (rmudg...@digium.com):
I've always used dahdi-genconf to just create the dahdi-channels.conf
and since our PRI is fairly simple (just dump all the channels into
one
group) it works with dialing with dahdi/g1/(number). I'm trying to
understand the file
I indeed access Gmail and GV from a different IP than the Asterisk server,
but just made it from there and it's ok.
The Asterisk server is in the US but I'm currently abroad. Is that a
problem?
-Original Message-
From: asterisk-users-boun...@lists.digium.com
What you say...Richard Mudgett (rmudg...@digium.com):
I've always used dahdi-genconf to just create the
dahdi-channels.conf
and since our PRI is fairly simple (just dump all the channels
into
one
group) it works with dialing with dahdi/g1/(number). I'm trying
to
What you say...Richard Mudgett (rmudg...@digium.com):
What you say...Richard Mudgett (rmudg...@digium.com):
I've always used dahdi-genconf to just create the
dahdi-channels.conf
and since our PRI is fairly simple (just dump all the channels
into
one
group) it works
On Tue, 5 Feb 2013, Darin Iv wrote:
Is there any solution, I want to know at first sight from which division
the voicemail came from like for example I need 3 more users to send
when some one calls an inbound route named darin when it reaches darin
voicemail then admin should send from
I have clarification in which how we can enable direct dial when we press
numbers in 3cx phone on hook. Now its like we have to use dial button to
dial. Previously I am able to dial directly after entering number. Now its
not working. Can someone help me on it. Is this a setup that we have to do
24 matches
Mail list logo