On Wednesday 25 Feb 2015, Thufir wrote:
On Fri, 20 Feb 2015 13:05:56 -0700, Harry McGregor wrote:
Hypothetical: lag, choppy connection, dropped calls. Of course, I'd
start with checking logs. How would I establish that the problem is that
(some) of the ports aren't gigabit?
Any port with
On Wed, 25 Feb 2015, A J Stiles wrote:
The limiting factor with a switch carrying IP telephony traffic is not
bandwidth, but routing table entries; and even cheap switches nowadays
will usually take 1024 entries, if not 4096.
Are you referring to the MAC CAM table? Saying 'routing table' and
On 02/25/2015 09:28 AM, Steve Edwards wrote:
On Wed, 25 Feb 2015, A J Stiles wrote:
The limiting factor with a switch carrying IP telephony traffic is
not bandwidth, but routing table entries; and even cheap switches
nowadays will usually take 1024 entries, if not 4096.
Are you referring to
Hi list, I need your help ,I have an incoming call x the ivr and the
operator takes the call. ext 101 , If a second call reenters and the
operator is talking, I want to send to the extension 102 I use the
Variable DIALSTATUS , but not working
check IVR
[IVRINMA]
exten = s,1,Wait(1)
exten =
On Wed, 25 Feb 2015, John Kiniston wrote:
I'd recommend using DEVICE_STATE
On your extension 101, Check the DEVICE_STATE of peer SIP/101, If it's
not 'NOT_INUSE' then dial it, Otherwise dial SIP/102
exten =
101,1,ExecIf($[${DEVICE_STATE(SIP/101)}=NOT_INUSE]?Dial(SIP/101,40))
same =
I'd recommend using DEVICE_STATE
On your extension 101, Check the DEVICE_STATE of peer SIP/101, If it's not
'NOT_INUSE' then dial it, Otherwise dial SIP/102
exten =
101,1,ExecIf($[${DEVICE_STATE(SIP/101)}=NOT_INUSE]?Dial(SIP/101,40))
same = n,Dial(SIP/102,40,t)
same = n,Hangup()
another issues with cisco 7975
I have phone registered on asterisk
have 2 different issues on different versions of firmware,
on 9-4-2-1S I have not working 3way conference, when I trying to connect second
call, phone says “unable to set up conference”
and sending some cisco xml data to
Hypothetical: lag, choppy connection, dropped calls. Of course, I'd
start with checking logs. How would I establish that the problem is that
(some) of the ports aren't gigabit?
Small office, about five agents.
Had to run some small offices with SIP hardphones and basic switches. Unless
