Re: [asterisk-users] Exceptionally long queue length queuing

Hello list, Hope you are all doing well! Sorry for the long email but I tried to explain all I've seen regarding this issue I am going to open a ticket for this issue but I found it useful to already explain it here. I've also recently faced this "Exceptionally long queue length queuing"

Re: [asterisk-users] Fwd: blf problems after dialplan reload

On Wed, Jul 22, 2020 at 6:24 PM Israel Gottlieb wrote: > > > > Hi Guys > we have a system that uses a lot of custom hints based on the extension > the extensions use the format of ext-system for example 200-pbx01 > when starting asterisk the "core show hints" show the correct hints and > blf

[asterisk-users] Fwd: blf problems after dialplan reload

Hi Guys we have a system that uses a lot of custom hints based on the extension the extensions use the format of ext-system for example 200-pbx01 when starting asterisk the "core show hints" show the correct hints and blf works as expected in the extensions.conf we have _.,hint,Custom:${exten}

Re: [asterisk-users] module cel error with bridge events

Le 22/07/2020 à 17:47, Joshua C. Colp a écrit : On Wed, Jul 22, 2020 at 12:44 PM Administrator > wrote: No one on this ? Le 10/07/2020 à 18:06, Administrator a écrit : > Hi, > > On Asterisk 16.11.1 when enabling cel I get error with BRIDGE_START

Re: [asterisk-users] module cel error with bridge events

No one on this ? Le 10/07/2020 à 18:06, Administrator a écrit : Hi, On Asterisk 16.11.1 when enabling cel I get error with BRIDGE_START and BRIDGE_END events zone-s*CLI> module reload cel The module 'cel' reported a reload failure     -- Reloading module 'cel' (CEL Engine) [2020-07-10

Re: [asterisk-users] Failed to authenticate device message

Hi Jerry Le 22/07/2020 à 14:54, Jerry Geis a écrit : I am getting this message: Failed to authenticate device ;tag=149853321 for INVITE, code = -1 but it does not report the "connecting" address. Who is failing connecting ? I either need to block someone or fix something - I'm thinking

Re: [asterisk-users] Failed to authenticate device message

You didn’t post the Asterisk version, but if this is an OLD asterisk version then the source IP may be missing from messages/logs. If you have low traffic in general then using something like Wireshark may help you examine any suspicious SIP packet on the PBX. For higher volumes it’s like

Re: [asterisk-users] module cel error with bridge events

On Wed, Jul 22, 2020 at 12:44 PM Administrator wrote: > No one on this ? > > Le 10/07/2020 à 18:06, Administrator a écrit : > > Hi, > > > > On Asterisk 16.11.1 when enabling cel I get error with BRIDGE_START > > and BRIDGE_END events > > > > zone-s*CLI> module reload cel > > The module 'cel'

Re: [asterisk-users] Failed to authenticate device message

>Did you check your security log? >There is usually a wealth of info there about who, what, where when and why I also checked /var/log/asterisk/messages and it just has the same line. Nothing additional. Jerry -- _ --

Re: [asterisk-users] Failed to authenticate device message

Did you check your security log? There is usually a wealth of info there about who, what, where when and why. Andrew On Wed, 22 Jul 2020 at 11:22 pm, Jerry Geis wrote: > >exten = i,1,Verbose(Incoming ANONYMOUS SIP call from ${CALLERID(name)} > >${CALLERID(num)} SRC IP ${CHANNEL(recvip)}) > >

Re: [asterisk-users] Failed to authenticate device message

>exten = i,1,Verbose(Incoming ANONYMOUS SIP call from ${CALLERID(name)} >${CALLERID(num)} SRC IP ${CHANNEL(recvip)}) Thanks - its not an incoming call - its just a log on the CLI There is nothing before it and nothing after - no incoming call. Jerry --

[asterisk-users] Failed to authenticate device message

I am getting this message: Failed to authenticate device ;tag=149853321 for INVITE, code = -1 but it does not report the "connecting" address. Who is failing connecting ? I either need to block someone or fix something - I'm thinking block - but I dont know who. How do I found out the connecting