appreciate any comments!
Thanks in advance
Christian Peter
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman
appreciate any comments!
Thanks in advance
Christian Peter
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman
and my extensions.conf
Greetings
Christian Peter
##
SIP CONF:
[general]
port=5060
bindaddr=0.0.0.0
context=default
videosupport=no
useragent=TEST
;externip=xxx.xxx.xxx.xxx
disallow=all
allow=gsm
allow=alaw
allow=g729
allow=g723.1
allow=g726
allow=ilbc
allow=speex
Hi Michael,
thanks for you answer. Comments below.
Am Donnerstag, den 13.01.2005, 12:38 +0100 schrieb michael koehler:
inline
On Jan 10, 2005, at 10:12 PM, Christian Peter wrote:
- If I call outside (with Nikotel to German Telekom) there is a remote
hangup after 2 minutes. I've seen
anybody help me with this issue. Please no switch to Hylafax
mails, because I'm very happy with SpanDSP, it integrates nicely and
works most time.
Thank you,
Regards
Christian Peter
___
--Bandwidth and Colocation Provided by http://www.api
Am Mittwoch, den 29.08.2007, 20:13 +0800 schrieb Steve Underwood:
Christian Peter wrote:
Hi list,
I'm running current SpanDSP
http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre6.tgz
with Asterisk 1.2.22 somewhat successfully.
Most Fax machines do work but I have problems
see where the problem is.
I tested Asterisk 1.2.5 and current SVN 1.2.
Thanks in advance
Regards
Christian Peter
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http
Sorry to reply to myself,
if I dial out with ISDN it works. I don't have a different SIP account
to test dial in SIP_PROVIDER_1 and dial out with SIP_PROVIDER_2.
Am Donnerstag, den 05.10.2006, 11:14 +0200 schrieb Christian Peter:
Hi list,
I hope somebody already had this kind of problem
Hi all,
I have a cologne chip card which is connected directly to the ntba.
Outgoing and incoming calls work fine, but incoming calls from ntba have
the wrong callerid (first 0 is missing). I'm using current jolly misdn
drivers and chan_misdn-14_04_05 with asterisk stable.
Is anyone seeing this
Hi again,
next problem I have is: I want to write an application which connects
via manager api and displays the current telephone state.
I know I have the action id to identify events which belong together.
But if I have a call going inside asterisk and asterisk rings a phone
these are two
Hi Stefan,
thanks for the immediate response.
Luckily I found a fix to my MISDN problem so I don't have to rely on the
channel information.
Thanks,
Christian
Am Samstag, den 13.08.2005, 10:53 + schrieb Stefan Reuter:
On Sat, 2005-08-13 at 11:59 +0200, Christian Peter wrote:
I know I
not been integrated in this verison.
Best regards
Hans
Christian Peter schrieb:
Hi all,
I have a cologne chip card which is connected directly to the ntba.
Outgoing and incoming calls work fine, but incoming calls from ntba have
the wrong callerid (first 0 is missing). I'm using
problems
with calls from two nikotel accounts.
If that's the case I'll vote for broken, too.
Christian Peter
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE
Hi there,
kudos to Snom for the attention they pay to the community! Thumbs up for
this!
CP
Am Mittwoch, den 04.01.2006, 16:48 +0100 schrieb Usman Tahir:
Old Ringer 2 4 will be available as 9 10 (in addition to the
existing melodies) in Version 5.1 to be released in a few days. Its
better
-cm says capicard_primux_2_1: too much voice to
send for NCCI=0x10101
Any hints?
Thanks in advance
Christian Peter
-- Executing SetCallerID(SIP/10-dec7, 10 10) in new stack
-- Executing Goto(SIP/10-dec7,
pbx_incoming_ip_telefon_1_autocontext_2|BYEXTENSION|1) in new stack
-- Goto
Hi Armin,
that's very nice.
Thank you
Christian
Am Freitag, den 13.01.2006, 11:22 +0100 schrieb Armin Schindler:
The show that your driver (the primux driver) is not fully CAPI 2.0
compatible, there are some messages missing. New chan_capi-cm needs those
indications.
I will have a look,
) at chan_capi.c:3423
#3 0xb7513954 in do_monitor (data=0x0) at chan_capi.c:4113
#4 0x42525ccd in start_thread () from /lib/tls/libpthread.so.0
#5 0x4208fb0e in clone () from /lib/tls/libc.so.6
Am Samstag, den 14.01.2006, 15:20 +0100 schrieb Armin Schindler:
On Fri, 13 Jan 2006, Christian Peter wrote
17 matches
Mail list logo