On Mon, 19 Jan 2004 at 06:26, Franz Edler wrote:
From: Dustin Knuttgen on Sunday, January 18, 2004 11:47 PM
We tried to use SuSE initially and had no luck compiling zaptel on
either 8.2 or 9.0. We even had Digium take a look. After working
on it for days we finally switched to Red Hat 9.
Hi Franz,
On Sun, 18 Jan 2004 at 21:47, Franz Edler wrote:
Now I learned, that I have to provide also the kernel-sources for
compiling zaptel. I have done that,
have you also copied the running kernel's configuration to the kernel
sources
zcat /proc/config.gz /usr/src/linux/.config
On Thu, 22 Jan 2004 at 23:36, Ken Alker wrote:
I'd like to get some feedback from users of USB headsets as to what
they like/dislike about the unit they own (manufacturer/model
number).
I've got a Labtec Axis 712 stereo USB headset. They also produced it
in a mono version (Axis 711). Both
Hi,
On Mon, 16 Feb 2004 at 04:10, Jim Archer wrote:
I would like to interface 4 BRI lines to Asterisk. I looked at
Digium's hardware list and, although they have solutions for PRI and
T1, I didn't see anything for BRI. I would like to avoid ISDN4Linux
if possible. Does anyone know of any
Hi,
today's BRI thread showed, that the mailing list has a delay of about
an hour again. Is this still due to the Digium relocation, or is
something else going on with the list server?
cu
Reinhard
___
Asterisk-Users mailing list
[EMAIL
Hi,
On Mon, 16 Feb 2004 at 17:22, FastJack wrote:
anyone knows where to get one of theses cards (or any other based on
the HFC-S chipset) in germany?
I bought a Longshine LCS-8051 Card recently.
http://www.longshine.de/produkt-ger/modem/8051.htm
It works with i4l and zaphfc.
K+K Computer
On Tue, 17 Feb 2004 at 21:07, Armand A. Verstappen wrote:
Note that when using more than one card, the module will segfault
when unloading:
I also get this with a single HFC-S card when I try to unload the
zaphfc module once it has been used by Asterisk.
cu
Reinhard
Hi,
On Thu, 4 Mar 2004 at 11:29, Hans-Henrik Andresen wrote:
But when compiling zaptel I got this error
[...]
zaptel.c:5892: error: parse error before unsigned
make: *** [zaptel.o] Error 1
Any help on this ?
you left out the important part of the error log. I guess the compiler
complains
On 13 Mar 2003 at 13:00, Howard White wrote:
To our multi-lingual listers - do IAX or TASTE have any non-English
complications?
In German, Taste means key like in keyboard, not lock and key.
But the word is pronounced differently than the English taste.
cu
Reinhard
On Wed, 4 Jun 2003 at 17:09, Michael Labuschke wrote:
wasn't the capi driver for the avm only for one card per pc ?
That only applies to their passive cards. The c2 is an active card
with two ISDN ports, so it should be able to handle them both at once.
cu
Reinhard
On Wed, 25 Jun 2003 at 17:04, Holger Schildt wrote:
is there another IAX-CLient for Linux beside Gnophone?
There is tkPhone, but it is still beta.
You can download version 0.1 from http://tel.sf.net.
There is no pop-up-window or any sound that caughts my attention.
This feature doesn't
Hi,
On 15 Sep 2003 at 11:52, Klaus-Peter Junghanns wrote:
We are working on an alternative, a passive multiport ISDN card that
supports TE and NT mode with zaptel drivers for asterisk.
this sounds very interesting. Are there any details available yet?
cu
Reinhard
Hi,
On Wed, 22 Oct 2003 at 15:44, Chris Albertson wrote:
Also do remember that PCI card's config registrs are little endian
and you will have to mantally byteswap when you read the hex dump.
... or simply use lspci -nv to get the IDs instead of the textual
translations.
cu
Reinhard
Hi,
On Fri, 19 Nov 2004 at 10:37, Christiaan Brink wrote:
I have a HFC based ISDN BRI card in a Fedora Core 2 box (2.6.5
kernel). I was just wondering, is zaphfc the best way to interface
this type of card with Asterisk?
you might be able to interface these cards with mISDN as well (I don't
Hi,
On Tue, 14 Dec 2004 at 09:33, Rick Green wrote:
(WHy is this?! I've noticed it with every sound card I've ever
tried, and it infuriates me that I have to deal with feedback from
the analog loopback in the sound card! Supposedly these soundards
are full-duplex, so why are they looped by
Hi,
On Tue, 23 Mar 2004 at 09:35, Ignace CARIA wrote:
My question is: is it possible to convert the second ISDN card into
NT-Mode?
yes.
If yes, which card must I use?
One that is based on the HFC-S chipset. They are available from
various manufacturers and priced around 30 Euro here in
Hi,
On Tue, 23 Mar 2004 at 15:36, Diego Ercolani wrote:
I've found the same unresolved issue with libtiff. I use SuSE 9.0
SuSE Linux 9.0 comes with libtiff-3.5.7 which allows to compile and
run Steve's fax applications just fine with the additional headers
provided by him. So which unresolved
Hi,
On Mon, 12 Apr 2004 at 19:49, asterisk wrote:
[...]
chan_capi.c: In function `pipe_frame':
chan_capi.c:1187: error: too many arguments to function `ast_dsp_process'
make: *** [chan_capi.o] Error 1
This looks like you are trying to compile chan_capi against a version
of Asterisk (or
Pedro,
On Fri, 7 May 2004 at 10:51, Pedro Vela wrote:
We have a quadBRI in NT mode with bri_cpe_ptmp signalling and when
connect a ISDN telephone to this nothings happen.
What can I do?
- You have to use the right signalling (bri_net_ptmp)
- The phone has to be connected to the card with
Hi,
On Thu, 28 Oct 2004 at 12:16, Louis van Dompselaar wrote:
Does anyone know of a way to disable the ports on the C4 that are
not connected?
I think changing devices=4 to devices=2 in capi.conf should do the
trick. Of course you have to make sure that your ISDN lines are
connected to the
On Thu, 28 Oct 2004 at 14:08, Louis van Dompselaar wrote:
It's already at devices=2 but that doesn't make a difference.
Sorry, I was looking at the wrong place and drawing the wrong
conclusions ...
I think chan_capi sees the C4 as one single device with four
controllers.
A device
On Mon, 10 Nov 2003 at 09:56, WipeOut wrote:
If I have a MySQL table with dialing codes and a corresponding
description (see below) and I want to lookup the best match for a
phone number.. What would the SQL look like to do it?
I don't know MySQL very well, but maybe you also get an idea of
On Mon, 10 Nov 2003 at 12:33, Reinhard Max wrote:
SELECT DISTINCT *,length(code)
FROM a
WHERE '00442085673456' LIKE (code || '%')
ORDER length(code) DESC;
^
BY
Oops, that one got lost when I re-formatted the query.
cu
Reinhard
On Mon, 10 Nov 2003 at 14:55, Michael Bielicki wrote:
Just as a tip you could do that with regex functions as well,
omitting the quite costly length functions ..
Well, regular expressions can be costly as well, and it depends on the
DBMS implementation how costly length() is. If the actual
On Mon, 10 Nov 2003 at 10:17, brez wrote:
SELECT *, length(code)
FROM a
WHERE code = '00442085673456'
OR code = '0044208567345'
OR code = '004420856734'
OR code = '00442085673'
OR code = '0044208567'
OR code = '004420856'
OR code = '00442085'
OR
Hi,
On Wed, 12 Nov 2003 at 13:53, David Carr wrote:
I have read all the mailing list posts regarding rxfax receiving a
fax and outputing an 8 byte tif file (tif header only). This is the
problem I can't seem to get past.
I think this is not necessarily a single problem. As I understood
Steve
Hi,
On Thu, 20 Nov 2003 at 08:44, Chris Hirsch wrote:
Anybody have any ideas?
Asterisk uses UDP, but ssh can only forward TCP ports.
cu
Reinhard
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Hi,
On Tue, 13 Jan 2004 at 21:06, Jason Penton wrote:
(I have successfully managed to receive faxes thru my isdn card so I
don't see why I shouldn't be able to send them).
that's interesting, as in my tests it was just the other way around.
I can send faxes through my AVM ISDN card
Hi,
On Wed, 14 Jan 2004 at 12:15, Klaus-Peter Junghanns wrote:
The quadBRI card is EUR 600, excluding VAT.
this looks like a great piece of hardware, but I think it's too
expensive for home users like me who wouldn't really need more than
one or two BRI ports.
So do you have any plans for a
Hi,
On Wed, 14 Jan 2004 at 15:11, Klaus-Peter Junghanns wrote:
Currently i am polishing the driver for the hfc-s pci a chipset,
which i used in numerous el-cheapo ISDN cards (street price around
30 EUR).
ah - that's much closer to the home user's typical budget :)
Is there a list of cards
30 matches
Mail list logo
