Help I need to install asterisk 1.4.X using unicall, somebody can tell me
which are the correct versions of spandsp, libunicall, libmfcr2,
libsupertone, to install with asterisk 1.4, I have installed a prepatched
version, but I need to know which are the correct releases
Thanks in advance.
HI to All, I have an issue, when I connect a TDM04B and a TE212P on my
server (Intel Entry Server board S3000AH) and boot RHEL4 the system launch
this message:
PCI: Unable to handle 64-bit address space for
I think the problem is the TE212P because the TDM04B is detected as a Tiger
Jet Network
Hi, I would like to develop a click to talk app to interface with
asterisk, anyone know about some SDK/frameworks to implement this.
Regards.
Ricardo Meléndez Rosales
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
.
Otherwise I will use 2 lines of my Asterisk PBX to make the transfer and it
reduce the incoming lines available for my ACD.
It's possible send the commands FLASH, FLASH+4 using the incoming line to my
MAINPBX via Asterisk like a normal telephone?
Thanks in Advance.
Ricardo Melendez
.
Otherwise I will use 2 lines of my Asterisk PBX to make the transfer and it
reduce the incoming lines available for my ACD.
It's possible send the commands FLASH, FLASH+4 using the incoming line to my
MAINPBX via Asterisk like a normal telephone?
Thanks in Advance.
Ricardo Melendez
-1298375678-890.gsm, how I can
customize this filename recordings?
Thanks in advance.
Ricardo Melendez
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http
.
Ricardo Melendez
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit
to make this, if is possible a softphone embedded into
html page for the same function.
I need to choice one to suit it to my needs
Thanks in advance.
Ricardo Melendez
___
-- Bandwidth and Colocation Provided by http://www.api
Hi to all, I need some help, I have an Asterisk Server in a small call
center, for inbound calls I setup a Queue in queues.conf and their
respective Agents in agents.conf, but when an Agent is calling out and a
call is coming from PSTN the call is send to that agents which have a call
in progress.
Hi, I need to add the timestamp to the recorded call filename, I use this
variable ${TIMESTAMP} in the Monitor() function, but when I look for this
call, the TIMESTAMP is missing in the filename.
I try to export this as a environment variable but nothing changes.
Any help is welcome, thanks.
Hi, I recently install asterisk 1.4 over fedora 4, I configured 12 zap channels
like this
In zaptel.conf
fxsks=1-4
fxsks=5-8
fxsks=9-12
loadzone=us
defaultzone=us
in zapata.conf
in channels section
context=incoming
signalling=fxs_ks
channel = 1-4
channel = 5-8
channel = 9-12
when i run ztcfg
Hi to All, I dont know much about PCI express slots in newer Servers, my
doubt is if the Digium and Sangoma PCI express cards, are compatible with
the x8 PCI express slots that come in the HP Proliant ML150 G5 server.
Thanks in advance.
Ricardo
Hi to All, I dont know much about PCI express slots in newer Servers, my
doubt is if the Digium and Sangoma PCI express cards, are compatible with
the x8 PCI express slots that come in the HP Proliant ML150 G5 server.
Thanks in advance.
Ricardo
Hi to All, I need to implement an automatic telephone messaging system that
works like this:
-the system generates the call based on mysql records or any database
-when the client answer the phone, the Asterisk PBX playback a recorded
message
-when finish, hang up the channel.
Only for
answer the received call.
I have read the documentation but is very confuse.
This phone have a Outbound Proxy (where I put the asterisk IP and port 5060)
And 4 lines (where I configure the username/password and the Servers)
Anyone can help me.
Thanks in Advance.
Atte.
Ricardo Melendez
Hi to All, I am trying to flash to SIP image one Cisco 7941 IP Phone to work
with Asterisk, I have searched the internet and find some instructions but I
need the firmware SIP Image to complete the flash.
Can anyone help me with the SIP image for Cisco 7941?
The image name is
Hi friends, I am about to install an asterisk server using a Sangoma A101DE
over a Dell PE 2850 Server but I have doubts about PCI requirements.
First I see at sangoma page that A101DE is PCI-Express (I think x1 for the
size of the connector)
And the specs for the PE 2850 is
For PCI-X
Message-ID:
9b9941b90912081114w3db968f9ke2b4ce2d15622...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
2009/12/8 Ricardo Melendez rmelen...@utep.com.mx:
First I see at sangoma page that A101DE is PCI-Express? (I think ?x1 for
the
size of the connector)
Yes, it is PCIe
Hi to all, I have a strange behavior in my asterisk server.
I have a queue for 5 agents, the calls enter the queue an go to the agents
normally, but if I need to transfer or dial directly to an agent extension
that is already in a call, the pbx hung up the actual call (not the
transferred
Hi to all, I am in the process of setup a new asterisk server, I think in
the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE
Card.
The specs of the Proliant (HP PART 487932-001) about PCI are the next.
1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) ,
1 ( 1 ) x PCI
20 matches
Mail list logo