Hi!
Both of your answers helped to some extent thank you. The rest remains up to me
to play a bit with the configurations.
thanks,
Zoltan
Quoting Niksa Baldun [EMAIL PROTECTED]:
Hello,
I am a Kirk IP600 user too, and I had partial success in getting it to
work with chan_sccp. I changed the line 133 in chan_sccp.c to the following:
if ( (!s-device) (mid != RegisterMessage mid != AlarmMessage
mid != KeepAliveMessage mid != IpPortMessage)) {
And then I was able to register IP600 hansets, but only to find there
are other problems. I am currently communicating with Kirk support in
order to see what is happening. When I have more info I will send it to you.
Niksa
Julien Goodwin wrote:
On Thu, Jan 13, 2005 at 01:09:54PM +0200, Kelemen Zoltan arranged a set of
bits into the following:
Hi!
I have two, not too related questions:
- the probably simpler one: if anyone can help me out using a Cisco
7905G with chan_sccp? I did already managed to get it working with a SIP
image, I'd just like to see it work with this one as well. It's probably
something I screw up with the configuration, as the phone registers,
only I don't get any lines with it, although I have it configured it to
auto-login.
excerpt from my sccp.conf
-snip--
[SEP001193C2ABFC]
device=SEP001193C2ABFC
type=7905
autologin= c7905
callerid=cisco 7905
[c7905]
line = 1045
-snip--
(I have a default extension set for the entire sccp.conf, so that
shouldnt(?) be the issue)
That's the contents of a skinny config file, the two have different
formats. Here's what I use for one of my phones:
---snip---
[SEP003080628DD7]
type= 12
autologin = phone4
description = Cisco Phone 4
[phone4]
id = 4005
pin = 1237
label = Phone4
description = Phone4
callwaiting = 0
mailbox = 4005
cid_num = 4005
cid_name= Cisco Phone 4
--- endsnip ---
And I call with Dial(SCCP/phone4)
I have the XMLDefaultConf in place, tftp server running, although that's
about it. I would appreciate any pointers in this general direction.
What am I missing? :)
See above, copy the format, just use your own data.
The second, much more thorny question is: did anyone had any success on
using a KIRK IP600 with asterisk?
- The only thing I really found on the net were a couple of emails on
this list, that didn't get me too far.
The KIRK IP600 is a DECT (cordless) to IP solution, with support for
SCCP and H323. The SCCP interface was designed specifically to be
interoperable with Cisco Call Manager, and it emulates a 7940 for each
of the phones it has registered.
With chan_skinny I managed to register the phones, they've got tone, but
they would not ring out.
With chan_sccp I had no luck at all, I'm getting the following messages
on the CLI:
== Got message AlarmMessage
== Got message RegisterMessage
== Sending Packet Type RegisterRejectMessage (37 bytes)
Note: the two modules were NOT tried at once.
So far I didn't have time to check it out with h323, but If anyone had
it working that way, I'm interested in that one as well.
H323 is probably the one to try, but fix your sccp config like the above
(a compile fix for asterisk CVS has just been committed) and let me know
what you get (in debug mode very verbose). If anyone in Australia has one
or is able to arrange a loan for a few days I'd probably be able to make
them work, but without being able to hack on the code with the device it
makes it quite hard.
I'm just writing some code to see if I can fix the client sent
IPPortMessage without first registering that someone got before, if
anyone is able to duplicate that drop me a line and I'll see if my patch
works against it.
Thanks,
Julien Goodwin
chan_sccp developer
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
